Facebook Twitter Youtube MYhpi
Browse by Brand:
HPI Wants you! Introducing MYhpi, Everyone has a chance to win BIG! Register now for HPI's new VIP experience! This could be yours!
Car
Flight
Electrics
General Accessories
Fuel
All HPI Racing Electric Car Speed Controls
Optimise Your Search Criteria
HPI Racing > Radio Gear > Electric Car Speed Controls

Brand: Show All  (21), HPI Racing (15), Maverick (6)
Please choose a sub-category from the following selection:
Brushless Fwd/Brake/Rev Speed Controller (6), Fwd/Reverse Speed Controller (5), Micro Fwd/Rev Speed Controls (1), Speed Control Accessories (2), Stability Control Systems (1)

sort by:

SCM-2S WP WATERPROOF ELECTRONIC SPEED CONTROL
SCM-2S WP WATERPROOF ELECTRONIC SPEED CONTROL
The SCM-2S WP is a small and durable electronic speed controller that is suitable for Micro RC vehicles of all types! The SCM-2S WP is also fully waterproof, making it the only choice for anyone who enjoys driving their car in wet conditions. The SCM-2S WP is suitable for 5-6 NiMH cells, as well as 2S LiPo with a low voltage safety cut-off fitted to protect your LiPo batteries. Specification:FWD Cont. / Burst Current : 25A/100A BWD Cont. / Burst Current : 25A/100A Input : 2S LiPo, 5-6 Cells NiMH / NiCd Motor Limit 2S LiPo or 6 NI-MH : 280, 370 or 380 Size Motor RPM<30000 @7.2V Resistance : Fwd 0.003Ω, Rev 0.003Ω Built-in BEC : 1A / 6V (Linear Mode) Dimension / Weight : 34x24x14mm / 23.5gNOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
£21.99 (RRP inc. VAT)
FLUX ELH-6S BRUSHLESS WATERPROOF ESC
FLUX ELH-6S BRUSHLESS WATERPROOF ESC
1/8TH SCALE WATERPROOF SENSORLESS BRUSHLESS SPEED CONTROL.
£149.99 (RRP inc. VAT)
HPI D-BOX 2 ADJUSTABLE STABILITY CONTROL SYSTEM
HPI D-BOX 2 ADJUSTABLE STABILITY CONTROL SYSTEM
ADJUSTABLE ELECTRONIC STABILITY CONTROL FOR OFF-ROAD & ON-ROAD VEHICLES
£56.99 (RRP inc. VAT)
FLUX EMH-3S BRUSHLESS ESC
FLUX EMH-3S BRUSHLESS ESC
USE WITH FLUX MMH-4000KV BRUSHLESS MOTOR
£68.99 (RRP inc. VAT)
FLUX RELOAD ESC PROGRAM BOX V2
FLUX RELOAD ESC PROGRAM BOX V2
ALLOWS PROGRAMMING & UPDATING OF COMPATIBLE FLUX ESCS
£36.99 (RRP inc. VAT)
Flux Rage 1:8th scale 80Amp Brushless ESC
Flux Rage 1:8th scale 80Amp Brushless ESC
USE WITH FLUX SCREAM BRUSHLESS MOTOR
£96.99 (RRP inc. VAT)
FLUX VAPOR BRUSHLESS WATERPROOF ESC
FLUX VAPOR BRUSHLESS WATERPROOF ESC
Get increased weatherproof performance with brushless motors with the Flux Vapor electronic speed controller from HPI! The standard speed controller in the updated Sprint 2 Flux kits, the Flux Vapor features real Deans plugs for low-loss connectivity and sturdy brass tube connectors for connecting 12 gauge wires to any brushless motor. FEATURES:6-7 Cell NiMH/ NiCd or 2S/3S LiPo - Please Note: Vektor Motor Limit on 3S is 4800kV Waterproof! Can handle 40% MORE power than Motiv ESC Ultra low resistance (.0007 ohms / phase) Sensorless technology eliminates additional sensor wiring and complexity Lithium-Ion Compatible. **Programmable Lithium under-voltage cutoff protects delicate lithium packs from over-discharge High performance cross-cut aluminum heat sink Smooth startup and run with sensorless motors (Patents Pending) Linear Torque Braking allows better control on corner entry Connect to your PC using the #100573 Castle Link for super-easy customizations!
£58.98 (RRP inc. VAT)
FLUX Q-BASE BRUSHLESS ESC
FLUX Q-BASE BRUSHLESS ESC
COMPATIBLE WITH SENSORED AND SENSORLESS BRUSHLESS MOTOR.
£134.99 (RRP inc. VAT)
HPI RSC-18 ELECTRONIC SPEED CONTROL
HPI RSC-18 ELECTRONIC SPEED CONTROL
MICRO BRUSHED SPEED CONTROL. REVERSIBLE
£34.98 (RRP inc. VAT)
SC-3SWP2 WATERPROOF ELECTRONIC SPEED CONTROL
SC-3SWP2 WATERPROOF ELECTRONIC SPEED CONTROL
REVERSABLE SPEED CONTROL. USE WITH BRUSHED MOTORS DOWN TO 12 TURN
£35.99 (RRP inc. VAT)
SC-3SWP3 CRAWLER EDITION ESC
SC-3SWP3 CRAWLER EDITION ESC
SC-3SWP3 Crawler Edition Waterproof ESC featuring a unique Hill Descent Control (HDC) feature. The SC-3SWP3 is a powerful and durable speed controller that is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! The ESC is programmed with the use of jumpers to select one of three settings: 1) F/R with 100% Drag Brake - Crawler mode for steep and rough terrain. 2) F/R with 80% Drag Brake - HDC mode for moderately steep terrain 3) F/B/R Drag Brake Off - Higher speed, open trail driving The Hill Descent Control (HDC) function will maintain a smooth controlled speed while descending. When the throttle position is at neutral, brakes will be applied automatically. Additional braking can be applied manually as needed for extreme descents. Once throttle position is returned to neutral, HDC will continue to function. If you've got plenty of power to strap into your RC, you can count on the SC-3SWP3 to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries. Specification: Forward Continuous Current: 40A Forward Burst Current: 180A Reverse Continuous Current: 20A Reverse Burst Current: 90A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 off-road crawler Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36x29.5x17.5mm Weight: 41g NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
£35.99 (RRP inc. VAT)
FLUX EMH-80A BRUSHLESS WATERPROOF ESC
FLUX EMH-80A BRUSHLESS WATERPROOF ESC
WATERPROOF SENSORLESS BRUSHLESS SPEED CONTROL.
£68.99 (RRP inc. VAT)
EMH-3S ESC FAN (25MM/6V)
EMH-3S ESC FAN (25MM/6V)
Replacement 25mm 6V ESC fan with JR connector. Fits EMH-3S ESC.
£10.98 (RRP inc. VAT)
SC-3SWP2 WATERPROOF ELECTRONIC SPEED CONTROL WITH T-PLUG
SC-3SWP2 WATERPROOF ELECTRONIC SPEED CONTROL WITH T-PLUG
Waterproof, powerful, rugged and now even smaller than before! The SC-3SWP2 is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The SC-3SWP2 is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! This new 'version 2' is smaller than the original, making it perfectly sized to fit in the tight spaces of the latest RC vehicles, whether you have a touring car racer or desert buggy! If you've got plenty of power to strap into your RC, you can count on the SC-3SWP2 to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries. The SC-3SWP2 is great for all kinds of 1/10th scale vehicles: buggies touring cars drifters Mini racers desert buggies vintage touring cars stadium trucks short course trucks desert trucks Fit the SC-3SWP2 in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features: 2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification: Forward Continuous Current: 40A Forward Burst Current: 180A Reverse Continuous Current: 20A Reverse Burst Current: 90A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36x29.5x17.5mm Weight: 41g NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
£35.99 (RRP inc. VAT)
GT SPEED CONTROLLER
GT SPEED CONTROLLER
ONLY FOR USE WITH E-SAVAGE
£79.98 (RRP inc. VAT)

sort by: