Facebook Twitter Youtube MYhpi
Browse by Brand:
HPI Wants you! Introducing MYhpi, Everyone has a chance to win BIG! Register now for HPI's new VIP experience! This could be yours!
Car
Flight
Electrics
General Accessories
Fuel
All Maverick Electric Car Speed Controls
Optimise Your Search Criteria
Maverick > Radio Gear > Electric Car Speed Controls

Brand: Show All  (22), HPI Racing (14), Maverick (8)
Please choose a sub-category from the following selection:
Brushless Fwd/Brake/Rev Speed Controller (4), Fwd/Reverse Speed Controller (3), Micro Speed Control Combination Packs (1)

sort by:

MSC-30BL-WP BRUSHLESS SPEED CONTROLLER
MSC-30BL-WP BRUSHLESS SPEED CONTROLLER
New Water-Resistant Brushless ESC for the Strada Evo S series of cars FeaturesWater-resistant* and dust-proof. The ESC has been designed to work in wet conditions. 2-3S Capable (for 3S you must change the standard 5V cooling fan to a 12V cooling fan, or supply the 5V cooling fan from the receiver 5-6V); Compatible with sensorless brushless motor. 2 running modes (“Forward with brake” mode, “Forward/Backward with brake” mode). Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment. 4 Punch modes from “Soft” to “Very aggressive” to be suitable for different chassis, tires and tracks. Multiple protection features: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection /Throttle signal loss protection / Motor blocked protection. Easily programmed with the “SET” button *Please remove the cooling fan when running the ESC very wet conditions. *After running the ESC in wet conditions, please clean and dry it to avoid the oxidation to copper connectors SpecificationContinuous Current: 45A Burst Current: 220A Resistance: 0.0012 ohm Application: 1/10 scale on-road and off-road Motor Limit: 2S LiPo or 6 cells NiMH - On-road: ≥9T, Off-road: ≥12T, 3650 size motor 3S LiPo or 9 cells NiMH - On-road: ≥12T, Off-road: ≥18T, 3650 size motor Battery: 4-9 Cells NiMH or 2-3S Lipo** Built-in BEC: 6V/2A Program Port: Multiplexed with cooling fan port Motor Type: Sensorless Brushless Dimension: 48.5 x 38 x 32mm Weight (with wires): 90g**1) For 4-6 cells NiMH or 2S Lipo: You needn't change the 5V cooling fan on the ESC; **2) For 7-9 cells NiMH or 3S Lipo: You must change the original 5V cooling fan to 12V cooling fan, or supply the 5V cooling fan from the receiver (5-6V);
£56.99 (RRP inc. VAT)
MSC-25 ELECTRONIC SPEED CONTROLLER (SCOUT RC)
MSC-25 ELECTRONIC SPEED CONTROLLER (SCOUT RC)
FORWARD & REVERSE WITH NEUTRAL BRAKE
£40.98 (RRP inc. VAT)
MSC - 27BL 150A Brushless Speed Control
MSC - 27BL 150A Brushless Speed Control
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.
£189.99 (RRP inc. VAT)
MSRS - 248 2 IN 1 RECEIVER/ESC 2.4GHZ
MSRS - 248 2 IN 1 RECEIVER/ESC 2.4GHZ
"2 in 1" combined ESC and 2.4GHz Receiver unit for the Maverick iON range of cars. Features: Waterproof Forward, Reverse & Brake Linear Operation Automatic Setup System Over Current Protection Thermal Protection Low Voltage Protection Specification: Max Current: 20A Drive / 15A Reverse Input: 6.0-8.4V Motor Limit: 20 Turn 370 Brushed BEC: 6.0V Case dimensions: 35.1x25.3x14mm Weight: 7.4g with connectors and switch
£29.99 (RRP inc. VAT)
MAVERICK MSC-29BL-80WP
MAVERICK MSC-29BL-80WP
Maverick MSC-29BL-80WP Brushless ESC Features: 1. Water-resistant* and dust-proof. The ESC has been designed to work in wet conditions. a.*Please remove the cooling fan when using the ESC very wet conditions. b.*After using the ESC in wet conditions, please clean and dry it to avoid the oxidation to copper connectors 2. 2-3S Capalable (for 3S you must change the standard 5V cooling fan to a 12V cooling fan, or supply the 5V cooling fan from the receiver 5-6V); 3. Compatible with sensorless brushless motor. 4. 3 running modes (“Forward with brake” mode, “Forward/Backward with brake” mode, and “Rock Crawler” mode). 5. Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment. 6. 9 Punch modes from “Soft” to “Very aggressive” to be suitable for different chassis, tires and tracks. 7. Multiple protection features: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection. 8. Easily programmed with the “SET” button on the ESC Specification: Continuous Current: 80A Burst Current: 540A Resistance: 0.0004 ohm Application: 1/10 scale On-Road and Off-Road Motor Limit: 1) 2S LiPo/6 cell NiMh; On-Road: ≥ 5.5T; Off-Road: ≤ 6000Kv; 3650 Size Motor 2) 3S LiPo/9 cell NiMh; On-Road: ≥ 8.5T; Off-Road: ≤ 4000Kv; 3650/3660 Size Motor Battery: 4-9 cells NiMh or 2-3S LiPo 1) For 4-6 cells NiMH or 2S Lipo: You needn't change the 5V cooling fan on the ESC; 2) For 7-9 cells NiMH or 3S Lipo: You must change the original 5Vcooling fan to 12V cooling fan, or supply the 5V cooling fan from the receiver (5-6V); Built-in BEC: 6V/2A Linear Program Port: Multiplexed with cooling fan port Motor Type: Sensorless Brushless Dimension: 46x34x35mm Weight: 82g Use with #MV29001 - Maverick MM-29BL-4000 Motor
£47.99 (RRP inc. VAT)
MSC-30BR-WP BRUSHED SPEED CONTROLLER
MSC-30BR-WP BRUSHED SPEED CONTROLLER
The MSC-30BR-WP is a durable speed controller that is suitable for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The MSC-30BR-WP is also fully waterproof, making it the a great choice for anyone who enjoys playing in wet conditions. The MSC-30BR-WP can handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, and features a safety cut-off to protect your LiPo batteries. Features2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehiclesSpecification:Forward Continuous Current: 40A Forward Burst Current: 180A Reverse Continuous Current: 20A Reverse Burst Current: 90A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm PWM Frequency: 1 KHz Dimensions: 46.5x34x28.5mm Weight: 65g
£33.99 (RRP inc. VAT)
MSC-30BR-SCOUT-WP BRUSHED SPEED CONTROLLER
MSC-30BR-SCOUT-WP BRUSHED SPEED CONTROLLER
The MSC-30BR-SCOUT-WP is a durable speed controller that is specifically designed for crawlers! The MSC-30BR-SCOUT-WP is fully waterproof, making it the a great choice for anyone who enjoys playing in wet conditions. The MSC-30BR-SCOUT-WP can handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, and features a safety cut-off to protect your LiPo batteries. Features2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehiclesSpecification:Forward Continuous Current: 40A Forward Burst Current: 180A Reverse Continuous Current: 20A Reverse Burst Current: 90A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm PWM Frequency: 1 KHz Dimensions: 46.5x34x28.5mm Weight: 65g
£33.99 (RRP inc. VAT)
MSC-30BL-WP BRUSHLESS SPEED CONTROLLER (T-PLUG)
MSC-30BL-WP BRUSHLESS SPEED CONTROLLER (T-PLUG)
Replacement Brushless ESC for the Strada Red series of cars Can also be used to upgrade the standard Strada when used in conjunction with a Brushless Motor: #MV22602 - MM - 22BL 3215KV Brushless Motor MSC-30BL-WP BRUSHLESS SPEED CONTROLLER FeaturesWater-resistant* and dust-proof. The ESC has been designed to work in wet conditions. 2-3S Capable (for 3S you must change the standard 5V cooling fan to a 12V cooling fan, or supply the 5V cooling fan from the receiver 5-6V); Compatible with sensorless brushless motor. 2 running modes (“Forward with brake” mode, “Forward/Backward with brake” mode). Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment. 4 Punch modes from “Soft” to “Very aggressive” to be suitable for different chassis, tires and tracks. Multiple protection features: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection /Throttle signal loss protection / Motor blocked protection. Easily programmed with the “SET” button *Please remove the cooling fan when running the ESC very wet conditions. *After running the ESC in wet conditions, please clean and dry it to avoid the oxidation to copper connectors SpecificationContinuous Current: 45A Burst Current: 220A Resistance: 0.0012 ohm Application: 1/10 scale on-road and off-road Motor Limit: 2S LiPo or 6 cells NiMH - On-road: ≥9T, Off-road: ≥12T, 3650 size motor 3S LiPo or 9 cells NiMH - On-road: ≥12T, Off-road: ≥18T, 3650 size motor Battery: 4-9 Cells NiMH or 2-3S Lipo** Built-in BEC: 6V/2A Program Port: Multiplexed with cooling fan port Motor Type: Sensorless Brushless Dimension: 48.5 x 38 x 32mm Weight (with wires): 90g**1) For 4-6 cells NiMH or 2S Lipo: You needn't change the 5V cooling fan on the ESC; **2) For 7-9 cells NiMH or 3S Lipo: You must change the original 5V cooling fan to 12V cooling fan, or supply the 5V cooling fan from the receiver (5-6V);
£56.99 (RRP inc. VAT)

sort by: