HB Moore-Speed 908 - 1/12th scale body
When it comes to designing the best components and accessories for a single-minded purpose, former World and European Champion Andy Moore doesn't stop halfway - Moore-speed products are designed for winning! With that express purpose in mind, the all-new Moore-speed 908 bodyshell has been designed for what many consider the ultimate test of RC racing excellence: 1/12th scale circuit racing! This totally new design was developed from the ground up to be the ideal bodyshell for a wide range of racers and tracks. The air rushing over the bodyshell starts at the ground-level splitter and is forced over the front wheels and around the closed cockpit by ingeniously sculpted flow channels. Ridges over the front wheels disrupt the air just enough to break it loose over the wheel arches until it flows back down slightly over the middle section of the bodyshell. The closed cockpit area, with its elegantly elongated nose area, helps stabilise the air as it rushes over the midsection of the bodyshell, which hugs the battery and electronics area of the car chassis as closely as possible. As the air meets the rear wheels, further ducting and vertical supports direct the air over the rear spoiler, where a huge amount of downforce is created. Designed to master any track, the Moore-Speed 908 bodyshell will get you to pole position - and help you stay there! Moulded from crystal clear polycarbonate, the Moore-Speed 908 features clear overspray film, a pre-cut vinyl window mask sheet, and a decal sheet with headlights and Hot Bodies logos. For a lighter bodyshell with even more performance potential, check out the #66832LW Moore-Speed 908 1/12th scale body (Lightweight)! Submitted for BRCA & EFRA approval. Paint for both bodyshells done by Custom Blitz: www.customblitz.co.uk

HB Moore-Speed 908 - Lightweight 1/12th scale body
When it comes to designing the best components and accessories for a single-minded purpose, former World and European Champion Andy Moore doesn't stop halfway - Moore-speed products are designed for winning! With that express purpose in mind, the all-new Moore-speed 908 bodyshell has been designed for what many consider the ultimate test of RC racing excellence: 1/12th scale circuit racing! This totally new design was developed from the ground up to be the ideal bodyshell for a wide range of racers and tracks. This is the lightweight (LW) version of the Moore-speed 908 bodyshell, ideal for any racer looking to shave extra grams off their racing chassis. For a sturdier version of this same bodyshell, check out the #66832 standard weight Moore-speed 908 bodyshell. The air rushing over the bodyshell starts at the ground-level splitter and is forced over the front wheels and around the closed cockpit by ingeniously sculpted flow channels. Ridges over the front wheels disrupt the air just enough to break it loose over the wheel arches until it flows back down slightly over the middle section of the bodyshell. The closed cockpit area, with its elegantly elongated nose area, helps stabilise the air as it rushes over the midsection of the bodyshell, which hugs the battery and electronics area of the car chassis as closely as possible. As the air meets the rear wheels, further ducting and vertical supports direct the air over the rear spoiler, where a huge amount of downforce is created. Designed to master any track, the Moore-Speed 908 bodyshell will get you to pole position - and help you stay there! Moulded from crystal clear polycarbonate, the Moore-Speed 908 features clear overspray film, a pre-cut vinyl window mask sheet, and a decal sheet with headlights and Hot Bodies logos. For a sturdier version of this same bodyshell, check out the #66832 standard weight Moore-speed 908 bodyshell. Submitted for BRCA & EFRA approval. Paint for both bodyshells done by Custom Blitz: www.customblitz.co.uk

HB Raynard 02s 1/12th scale body - Lightweight
A good bodyshell can mean the world to a good 1/12th scale racer, and World Champion and multiple Worlds A-Finalist Andy Moore has developed the ultimate 1/12th circuit racing bodyshell! Designed to master any track, the Moore-Speed Reynard 02S bodyshell features a front end and midsection sculpted to direct air over the gentle curves of this single-focus bodyshell. It will hug the ground in corners of all sizes and give you superb high speed stability and performance on the straight. Moulded from crystal clear polycarbonate, the Moore-Speed Reynard 02S features clear overspray film and a decal sheet with headlights and Hot Bodies logos. For a more durable bodyshell that is perfect when dueling on tight tracks, check out the #66831 EU Moore-Speed Reynard 02S 1/12th scale body!