NITRO STAR F3.5 ENGINE WITH PULLSTART (GUNMETAL/BLACK)
COMPOSITE SLIDE CARB./NEW PORT TIMING/REAR EXHAUST/PULLSTART/INCLUDES AIR CLEANER AND GLOW PLUG (R5)

Front Bearing 7x19x6mm (F3.5 Pro)
Genuine HPI quality spare part for easy maintenance and repairs. Spare part for #101584 - NITRO STAR F3.5 Pro Rear Exhaust Without Pullstart

SHAPED EXHAUST GASKET (BLACK/2PCS)
These Shaped Exhaust Gaskets are genuine factory parts for HPI Savage X trucks. They are stock replacement parts for the Savage X4.6 and can be used on all Savage X engines if you're looking for a black gasket instead of the stock purple gasket. Sold in packs of 2.

CRANKCASE F3.5 INCLUDING CRANK BEARINGS (BLACK)
NITRO STAR F3.5

ME- 243 30CC Engine
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Crankshaft Assembly ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Flywheel Set ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Crankcase Assembly ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Air Filter Gasket ME-243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Ignition Coil ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Spark Plug ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

High Flow Exhaust Muffler ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Cap Head Screw M5x55mm 4 Pcs ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Clutch Shoe Holder ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Clutch Shoe/Spring Set ME - 243 (Blackout MT)
Genuine Maverick kit spare part for quick repairs, correct maintenance, and precise fitting.

Roto-Start Back Plate (Bullet 3.0)
Optional Roto Start backplate for the stock Bullet G3.0 engine, for replacing the pull-start. Use with any Roto Start or Roto Start 2 system. Please note: To fit this roto-start onto a G3.0 HO engine (WR8), you must also change the one-way bearing to: #1430 - ONE WAY BEARING FOR PULLSTART

Clutch Springs (1.1mm/3pcs)
HB D8/D8T

12T Clutch Bell
Change the gearing of your Bullet MT or ST for increase performance! With a smaller clutchbell, you get increased acceleration off the starting line or out of a turn; with a larger clutchbell you'll get increased top speed! It's your choice and they're easy to fit!

Exhaust Gaskets
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Flywheel
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Tuned Pipe Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Air Filter Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Exhaust Header Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Dust Protection and o-ring complete Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.