NITRO STAR F3.5 ENGINE WITH PULLSTART (GUNMETAL/BLACK)
COMPOSITE SLIDE CARB./NEW PORT TIMING/REAR EXHAUST/PULLSTART/INCLUDES AIR CLEANER AND GLOW PLUG (R5)

Front Bearing 7x19x6mm (F3.5 Pro)
Genuine HPI quality spare part for easy maintenance and repairs. Spare part for #101584 - NITRO STAR F3.5 Pro Rear Exhaust Without Pullstart

SHAPED EXHAUST GASKET (BLACK/2PCS)
These Shaped Exhaust Gaskets are genuine factory parts for HPI Savage X trucks. They are stock replacement parts for the Savage X4.6 and can be used on all Savage X engines if you're looking for a black gasket instead of the stock purple gasket. Sold in packs of 2.

CRANKCASE F3.5 INCLUDING CRANK BEARINGS (BLACK)
NITRO STAR F3.5

Roto-Start Back Plate (Bullet 3.0)
Optional Roto Start backplate for the stock Bullet G3.0 engine, for replacing the pull-start. Use with any Roto Start or Roto Start 2 system. Please note: To fit this roto-start onto a G3.0 HO engine (WR8), you must also change the one-way bearing to: #1430 - ONE WAY BEARING FOR PULLSTART

12T Clutch Bell
Change the gearing of your Bullet MT or ST for increase performance! With a smaller clutchbell, you get increased acceleration off the starting line or out of a turn; with a larger clutchbell you'll get increased top speed! It's your choice and they're easy to fit!

Exhaust Gaskets
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Flywheel
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Tuned Pipe Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Air Filter Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Exhaust Header Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Dust Protection and o-ring complete Set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Throttle slide drum
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Mid Range Needle Valve with o-rings
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Idle Adjustment screw and throttle guide screw set
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

Slide carburetor with two o-rings
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

G3.0 Engine slide carb w/pull start
Pulverize the competition with this amazingly fast, durable and easy to adjust engine! Using the latest technology and construction techniques, this is the standard powerplant for the Bullet 3.0 trucks! The slide carburettor fitted in this engine provides a faster response than standard carbs, making it ideal for performance-oriented drivers. Glow Plug: R5 (use HPI #1504) Displacement: 3.01cc Bore: 16.8mm Stroke: 13.6mm Maximum Horse Power: 2.2PS(2.17hp)/ 31,000 RPM Maximum RPM: 32,000rpm Head Gasket: x3 0.2mm Carburetor: F2 Composite 6.5mm

GASKET FOR CYLINDER (0.2MM/F3.5)
F3.5 Engine

SCREW M2.6x6mm for COVER PLATE (8pcs)
for COVER PLATE AND PULLSTART / NITRO STAR S-25 / F series

PULLSTART ASSEMBLY (WITHOUT ONE WAY BEARING)
NITRO STAR S-25 / F SERIES

ONE WAY BEARING FOR PULLSTART
NITRO STAR G3.0 / S-25 / F SERIES

WASHER SET FOR FUEL LINE FITTING
NITRO STAR T-15 / T3.0 / G3.0 / S-25 / F series

FUEL LINE FITTING/WASHER SET
NITRO STAR T-15 / T3.0 / G3.0 / S-25 / F series

UNIBALL
NITRO STAR S-25 / F series