2MM NITRIDE THRUST RACE BALLS
HIGH PERFORMANCE THRUST RACE BALLS FOR HPI, HB, ASSOCIATED, LOSI 1/10TH SCALE DIFFERENTIALS

HB Lightning Series Hard Anodised Rear Toe-in Bracket (59mm)
This item sets the inboard toe-in of the HB Lightning series vehicles to ~2.5 degrees. Useful for when grip is low and more on-power traction is required. Also a great upgrade part for the Trophy buggy/truggy series. Features:CNC Machined from high quality 7075 alloy Durable, cool grey hard anodised finish. Easy to identify markings Super smooth fit. PRO-TIP: Use 'Edit' - 1 or 2 Degree Rear Hubs (#010041, #010051) with this item. You will need to use narrow (5mm) rear hexes with this item on HB Lightning Buggy Series to fit within the BRCA dimension limits. (#HBC8039-2)

HB Lightning Series Threaded Shock Body Set (Front) (Buggy Only)
Fine adjustments are the key to winning races. These threaded shock bodies allow you to 'dial-in' exactly the correct amount of pre-load on your spring to give you the correct ride height for your chosen terrain. These shocks are for the front of the HB Lightning Buggy Series only. Features:CNC Precision Machined. Hard anodised in a cool grey finish. Retro-fit existing HB parts, no extras required.Also a great upgrade part for the Trophy buggy series. PRO-TIP: You can use your old 'O' rings and circlips. But, for maximum performance, give your shocks a new lease of life fit HBC8106-2. Recommended #030012 Titanium Shock Shaft

Titanium Turnbuckle (4 x 83mm) Natural Finish (Pair)
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8165 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying mark. PRO-TIP: Use the 'Edit' Turnbuckle Adjuster #000011 to adjust this component.

Titanium Turnbuckle (5 x 85mm) Natural Finish (Pair)
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8165 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying mark. PRO-TIP: Use the 'Edit' Turnbuckle Adjuster #000011 to adjust this component.

Titanium Shock Shaft (3.5 x 69mm) TiNi Finish (HB Lightning Buggy Rear & Stadium)
Achieve super smooth shock action and reliability with these Titanium shock shafts. Titanium Nitride coating reduces friction so the piston and oil do all the work allowing small changes in oil / piston set-up to be noticed. These are for All HB Lightning Series. Features:Manufactured from Grade 5 Titanium (6Al4V). Titanium Nitride coating for ultra smooth action. Lighter than standard item reducing unsprung mass.

Titanium Shock Shaft (4 x 105mm) TiNi Finish (Baja 5B)
Achieve super smooth shock action and reliability with these Titanium shock shafts. Titanium Nitride coating reduces friction so the piston and oil do all the work allowing small changes in oil / piston set-up to be noticed. Features:Manufactured from Grade 5 Titanium (6Al4V). Titanium Nitride coating for ultra smooth action. Lighter than standard item reducing unsprung mass.You will require a shock rod end for this shaft - HPI Part #85410

Titanium Turnbuckle (4 x 40mm) Purple Finish (Pair)
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8016 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying mark. PRO-TIP: Use the 'Edit' Turnbuckle Adjuster #000011 to adjust this component.

Titanium Hinge Pin (6 x 62.5mm) (Pair) (Baja 5B)
Lower the unsprung mass of your suspension and increase it's strength at the same time. Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item.

Titanium Hinge Pin (6 x 80.5mm) (Pair) (Baja 5B)
Lower the unsprung mass of your suspension and increase it's strength at the same time. Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item.

Titanium Hinge Pin (6 x 94mm) (Pair) (Baja 5B)
Lower the unsprung mass of your suspension and increase it's strength at the same time. Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item.

Titanium Hinge Pin (6 x 105mm) (Pair) (Baja 5B)
Lower the unsprung mass of your suspension and increase it's strength at the same time. Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item.

3/8 X 5/8 X 5/32 inch Ball Bearing (2pcs) (abec 3)
Direct Replacement for Associated #3976. Diff Outdrive Ball Bearing.