Facebook Twitter Youtube MYhpi
Browse by Brand:
HPI Wants you! Introducing MYhpi, Everyone has a chance to win BIG! Register now for HPI's new VIP experience! This could be yours!
Car
Flight
Electrics
General Accessories
Fuel
All Car
Optimise Your Search Criteria
Car
Please choose a sub-category from the following selection:
Cars & Trucks:Electric On-Road (23), Electric Off-Road (45), Nitro On-road (1), Nitro Off-Road (7), Petrol Off-road (7), Petrol On-Road (1)
Bodyshells:Bodyshell Accessories (11), Bodyshell Decals & Logos (5), Bodyshell Wings (21), 1/5 Bodyshells (16), 1/8 Monster Truck Bodyshells (20), 1/8 Stadium Truck Bodyshells (4), 1/8 Buggy Bodyshells (9), 1/10 Truck Bodyshells (41), 1/10 Touring Car Bodyshells (112), 1/10 Formula Bodyshells (1), 1/10 Buggy Bodyshells (6), 1/10 True Ten Bodyshells (8), 1/12 Truck Bodyshells (5), 1/18 Off Road Bodyshells (17), 1/18 On Road Bodyshells (4), Small Scale Truck Bodyshells (4), 1/8 Rally Car Bodyshells (4), 1/8 Short Course Bodyshells (1), 1/8 Touring Car Bodyshells (1)
Wheels & Tyres:1/5 Baja Wheels & Tyres (56), 1/8 Buggy Wheels & Tyres (11), 1/8 Monster Truck Wheels & Tyres (32), 1/8 Stadium Truck Wheels & Tyres (3), 1/10 Buggy Wheels & Tyres (9), 1/10 Truck Wheels & Tyres (52), 1/10 Touring Car Wheels (115), 1/10 Touring Car Tyres (57), 1/10 True Ten Wheels & Tyres (16), 1/10 Formula 10 Wheels & Tyres (4), 1/10 Super Size Wheels & Tyres (5), 1/18 Buggy Wheels & Tyres (2), 1/18 Truck Wheels & Tyres (5), 1/18 On Road Wheels & Tyres (11), Rock Crawler Wheels & Tyres (14), 1/10 Short Course Truck Wheels & Tyres (25), 1/12 Short Course Truck Wheels & tyres (3), 1/5 Truck Wheels & Tyres (7), 1/8 SC & Desert Buggy Wheels & Tyres (2), 1/5 Buggy Wheels & Tyres (7), 1/8 Rally Wheels & Tyres (21)
Engines:Car Nitro Engines (7), Car Nitro Engine Accessories (272), Car Petrol Engines (6), Car Petrol Engine Accessories (136)
Car Spares & Options:General Car Spares & Options (170), Specific Car Spares & Options (2275)

sort by:
items per page: 12, 24, 36, 48, 72
...
1
< prev
pages (155): 

VENTURE CRAWLER TOYOTA FJ CRUISER - BLACK
VENTURE CRAWLER TOYOTA FJ CRUISER - BLACK
VENTURE TOYOTA FJ CRUISER MATTE BLACK The Venture FJ Cruiser is the ultimate adventure-ready scale RC trail truck. Developed from the ground up to be the most advanced and driver-friendly scaler truck available, the HPI Venture is ready for trail driving across mountains, streams and more. It's the perfect trail companion for anyone from weekend ramblers to globe-trotting adventure heroes! Now available in an all-new color scheme on the licensed replica Toyota FJ Cruiser body, the Venture ready-to-run scale crawler will amaze you with its versatility and off-road capability. Drive one home today and see what you've been missing!
£349.98 (RRP inc. VAT)
CRAWLER KING 1979 FORD F150
CRAWLER KING 1979 FORD F150
Crawler King with 1979 Ford F-150 Body The rugged and durable Crawler King has a new classic body to add to its line-up: the 1979 Ford F-150! The long-time best-selling vehicle in the United States, the venerable F-150 is a great addition to the other available Crawler King trucks. With huge 2.2" pro-level crawling tires, an extra-strong, full-time shaft 4WD drivetrain, beefy solid axles and front-mounted battery, the Crawler King is the ideal way to introduce friends and family to crawling over any kind of terrain! The Crawler King kit includes the fully built and painted Crawler King truck, HPI radio set with 4 AA batteries, truck battery and charger, so it's truly Ready-To-Run!
£264.99 (RRP inc. VAT)
VENTURE SCALE BUILDER KIT
VENTURE SCALE BUILDER KIT
Venture SBK - Scale Builder Kit This brand new interpretation of the Venture allows you to build and completely customize the look and performance of the Venture from the very start and also includes a host of sought-after upgrades that helps the truck perform even better on the trail than before: Front Universal Driveshafts - Tougher, rebuildable and add extra steering angle. Aluminum Lower Links - Thick 6mm anodized links for great looks and increased performance 4-Link Rear - Increased articulation at the rear, improving grip for better side climbing. Axle Weights - Adding extra weight directly to the axles, for increased traction exactly where it's needed.
£209.99 (RRP inc. VAT)
E10 MICHELE ABBATE GRRRACING TOURING CAR
E10 MICHELE ABBATE GRRRACING TOURING CAR
E10 MICHELE ABBATE GRRRACING TOURING CAR The E10 touring car line-up is getting a big update! We're extremely excited to announce that SCCA racer 'Michele Abbate', with her GRRRacing '86 is going to be the face of the 'Grip' version of this versatile on-road platform! The E10 was designed so anyone can take the wheel and give RC racing a try! Arriving right out of the box in ready-to-run (RTR) form, it's a simple matter of 'charge and go' for hours of fun. The E10 uses true full-time 4WD and independent suspension and specially designed HPI T-Grip tires, making it easy to blast about on paved parking lot surfaces.
£209.99 (RRP inc. VAT)
SAVAGE XS FLUX CHEVROLET EL CAMINO SS
SAVAGE XS FLUX CHEVROLET EL CAMINO SS
Savage XS FLUX El Camino SS The El Camino is one of the most iconic cars of all time. With its muscle car front end and and pick-up truck rear, it looks perfectly at home on the Savage XS. Finished off with matching red colored springs for that extra flair to really make this truck stand out from the crowd. Of course the Savage XS retains the composite TVP (Twin Vertical Plate) chassis, 3S LiPo compatibility, waterproof electronics and super-durable drivetrain and suspension that have made the Savage XS FLUX the toughest - and fastest! - mini-monster truck in the world! This new version features the unique styling of the retro El Camino SS with brand new wrap graphics! The Savage XS Flux comes completely built and ready for you to add your own battery - after that, it's ready for wild stunts and bit air!
£349.98 (RRP inc. VAT)
RS4 SPORT 3 FLUX FORD GT HERITAGE EDITION
RS4 SPORT 3 FLUX FORD GT HERITAGE EDITION
RS4 SPORT 3 FLUX FORD GT HERITAGE EDITION One of the definite "retro classics" of the modern supercar era has been the Ford GT, and now it comes to the RS4 Sport 3 chassis in the ultimate classic racing livery of the Gulf Racing colors! Fitted with color-matching wheels, this car is an immediate head-turner and is ready to hit amazing top speeds thanks to its FLUX power! A powerful 4000KV brushless motor can power the car to speeds over 60 mph (100km/h), all you need to provide is a suitable car battery and charger!
£339.99 (RRP inc. VAT)
KEN BLOCK GYMKHANA FORD FIESTA ST RX43 PAINTED BODY (WR8)
KEN BLOCK GYMKHANA FORD FIESTA ST RX43 PAINTED BODY (WR8)
Refresh the look of your Ford Fiesta Ken Block replica car with this easy to install replacement body! Fully painted, detailed and cut out, this OEM replacement body is formed from light, flexible and highly durable polycarbonate plastic, then painted with special flexible paints for an authentic look. This body is an officially licensed replica of Ken Block's Ford Fiesta ST RX43
£68.99 (RRP inc. VAT)
WR8 FLUX KEN BLOCK GYMKHANA FORD FIESTA ST RX43
WR8 FLUX KEN BLOCK GYMKHANA FORD FIESTA ST RX43
Instant 60+ mph Awesome and Powerful Ken Block Action! You've seen it in Gymkhana 8, you've seen it in Terrakhana, and you've seen it racing in Gymkhana GRiD - Ken Block's jaw-droppingly cool color-shift Ford Fiesta ST RX43 racer is now available for you to drive away in a sweet 1/8th scale WR8 FLUX version! HPI FLUX power is able to propel this 485mm (19") long replica car from a standing start into wild racing action and 60+ mph (100+km/h) with just a single pull of the trigger, so it's the perfect way to copy Ken's epic performances with your friends! Underneath the replica Ken Block Ford Fiesta ST RX43 body, the WR8 FLUX chassis is based on the HPI Bullet RC monster truck, which means it's massively tough and can take a real beating on- or off-road! The WR8 FLUX is powered by a massive 4000KV brushless motor and waterproof 3S-capable speed controller, delivering power through tough metal gear differentials and the fully ball bearing-supported 4WD shaft drivetrain of the Bullet monster truck. Combine this with WR8 rally-style suspension geometry, custom-designed shock towers and dampers, plus extra-thick sway bars for extra control! Top it off with semi-slick tarmac tires and replica fifteen52 TurboMac wheels and you've got an instant head-turner in your hands! The HPI Racing WR8 is crammed with awesome features that enhance its durability anywhere you want to take it, including a high ground clearance, skidplate, foam front bumper, optimized rally-style suspension geometry, shock debris guards, mud deflectors on the chassis and much more. It's the ideal machine to race your friends on Gymkhana-style courses and multi-surface tracks, or anywhere you like! Like all HPI Racing RTR (Ready-To-Run) cars, the WR8 FLUX is completely pre-built: all you have to do is open the box, install the batteries and you are ready for awesome stunt action! 4 AA alkaline HPI Plazma batteries are included for the transmitter, all you have to provide is a 2S or 3S LiPo battery for the car, plus a LiPo charger. Custom Color-Shift Stars and Stripes Livery! Sure to turn heads, the stunning stars and stripes on Ken's replica Ford Fiesta ST RX43 are achieved with actual custom paint! The paint is protected from scratches because it's applied at the factory on the inside of the body, allowing the amazing irridescent color-changing effect to shine through! Easy To Drive! Just Pull The Trigger! The HPI WR8 FLUX is super-easy to drive and get familiar with - all you have to do is install a battery, plug it in and switch on the radio and car. It's that easy! To drive the car, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel - it's as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - hold it there to go into reverse. It takes seconds to get used to this easy operation, and in no time at all you'll be ripping off jaw-dropping moves, just like Ken Block in his head-to-head races! Replica fifteen52 Wheels and Real Rubber Tires For the ultimate in replica looks and fantastic performance, every HPI WR8 with Ken Block's Ford Fiesta ST RX43 is fitted with replica fifteen52 Turbomac wheels in a matching color scheme. The wheels really help the car stand out as a scale replica, and for extreme performance, the wheels are wrapped with semi-slick HPI tires molded in real rubber. The grippy rubber compound helps the car stick to asphalt or tarmac for real racing action, and the treaded design gives you plenty of grip even on dusty paved surfaces! Suspension Just Like Ken's Full-Size Car! Fans of racing cars, from real ones to little ones, know that to get the best out of your car you need to have a sturdy, tuneable suspension system. That's why the HPI Racing WR8 uses double wishbone suspension at all four corners, fitted with real coil over oil-filled shock absorbers and thick sway bars front and rear, just like real racing cars! Thick main suspension arms are mated to durable uprights fitted with a pair of rubber-sealed ball bearings for performance that matches Ken's Ford Fiesta ST RX43. Full Adjustability Just Like The Real Thing! All this function is nothing if you can't customize the car to your liking. Although we've set the car to be just about perfect right out of the box, you can easily adjust loads of settings, exactly like a real racing car! Ride height, shock angle and more are simple to adjust if you want to dive under the hood - HPI make it easy to be your own race car mechanic AND driver! Drive like Ken, or work on his car: it's easy to do both with the Ken Block WR8 FLUX! MMH-4000 Brushless Motor The FLUX MMH-4000 motor delivers massive power - plenty of juice for instant acceleration and enough power to pull out of just about any sideways drift. Option pinion gears are available to fine-tune the speed and torque delivery! The brushless design assures maximum performance with nearly no maintenance required. EMH-3S Speed Controller With the capacity to handle 2S and 3S LiPo power, the FLUX EMH-3S electronic speed control is able to handle the latest, most powerful batteries you can fit in the WR8 FLUX. The EMH-3S features an integrated cooling fan to keep it cool in warm conditions, reverse so you can back out of jams with ease, and for maximum adjustability it's fully programmable with our optional #100573 USB Programming Kit. Go-Fast Parts Galore! The HPI Racing WR8 is super easy to upgrade to make it faster, more responsive, even cooler-looking, tougher and more durable. Swap the wheels for different styles and colors, change the tires for gravel or other off-road surfaces, add alloy braces and suspension parts, lower the weight with woven graphite options and beef up the drivetrain with hardened steel parts - the choice is yours! Super-High Detailed Replica There's no getting around it: this is an amazingly detailed replica of Ken Block's Ford Fiesta ST RX43! From the front splitter to the rear wing, all the way down to the amazing fifteen52 TurboFan and TurboMac wheels, this car looks JUST like the real thing! Every tiny detail of Ken's real car is replicated in 1/8th scale: the grilles, headlights, the double-level rear wing and spoiler...even the American flag wrapped around the roof air intake! If you want to drive like Ken, you've GOT to have his car, and HPI have the only authorized RC replica of Ken's Ford Fiesta ST RX43 car! Features: Officially authorized replica of Ken Block's "Color-Shift" Ford Fiesta ST RX43 Pre-Assembled 1/8th scale car Based on the Bullet FLUX monster truck FLUX MMH-4000 motor Waterproof EMH-3S speed controller 2.4GHz radio system Water resistant steering servo Enclosed receiver box 3mm aluminum chassis with centralized weight balance Full-time 4WD for excellent control Efficient and tough shaft drivetrain Front skidplate with durable foam bumper Composite chassis braces for extra driving feel Tough oil-filled 4-gear differentials Replica fifteen52 TurboMac wheels Real rubber semi-slick tires Aluminum shock towers front and rear Oil-filled coil-over shocks with adjustable ride height Front and rear sway bars for excellent handling High ground clearance for driving on most surfaces Mud guards for rear shocks prevent dirt build-up Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver All hex head hardware Full set of rubber-sealed ball bearings #120036 WR8 FLUX KEN BLOCK GYMKHANA FORD FIESTA ST RX43 1/8th Scale 4WD Electric Rally Car with 2.4GHz Radio Specifications: Length: 485mm (19") Width: 227mm (8.9") Height: 172mm (6.7") Wheelbase: 300mm (11.8") Tire Diameter: 80mm (3.2") Drivetrain: Full-Time Shaft 4WD What You Need: 2S or 3S lithium-polymer battery with T-plug - we recommend HPI Racing Plazma packs! Battery charger - we recommend HPI Racing Reactor chargers! Ford Motor Company Trademarks and Trade Dress used under license to HPI RACING. www.fordmotorcompany.com All commercial and publicity rights to use or market the name 'Ken Block' and '43 Racing, LLC' is licensed exclusively through Wasserman Media Group, LLC. Specification may be subject to change
£499.98 (RRP inc. VAT)
WR8 3.0 KEN BLOCK GYMKHANA FORD FIESTA ST RX43
WR8 3.0 KEN BLOCK GYMKHANA FORD FIESTA ST RX43
Intense, Fuel-Powered Ken Block Action! You've seen it in Gymkhana 8, you've seen it in Terrakhana, and you've seen it racing in Gymkhana GRiD - Ken Block's jaw-droppingly cool color-shift Ford Fiesta ST RX43 racer is now available for you to drive away in a sweet 1/8th scale WR8 Nitro 3.0 version! HPI Nitro Star G3.0 power is able to propel this 485mm (19") long replica car from a standing start into wild racing action with a simple pull of the trigger, so it's the perfect way to copy Ken's epic performances with your friends! Underneath the replica Ken Block Ford Fiesta ST RX43 body, the WR8 3.0 chassis is based on the HPI Bullet RC monster truck, which means it's massively tough and can take a real beating on- or off-road! The WR8 3.0 is powered by an easy-to-use and powerful Nitro Star G3.0 engine with all-aluminum construction and 32,000 max RPM, delivering power through the same tough bevel gear differentials and fully ball bearing-supported 4WD shaft drivetrain of the Bullet monster truck. With authentic rally suspension geometry, oil-filled dampers and extra-thick sway bars you'll have fabulous control on dirt or tarmac! Top it off with semi-slick tarmac tires and replica fifteen52 TurboMac and Turbo-Fan wheels and you've got an instant head-turner in your hands! The HPI Racing WR8 3.0 is crammed with features that enhance its durability anywhere you want to take it, including a high ground clearance, skidplate, foam front bumper, optimized rally-style suspension geometry, shock debris guards, mud deflectors on the chassis and much more. It's the ideal machine to race your friends on Gymkhana-style courses and multi-surface tracks, or anywhere you like! Like all HPI Racing RTR (Ready-To-Run) cars, the WR8 3.0 is completely pre-built: all you have to do is open the box, install the batteries and add fuel and you're ready for awesome stunt action! HPI Plazma AA batteries are included for the transmitter and car, all you have to provide is RC nitro car fuel from your local RC model shop. Custom Color-Shift Stars and Stripes Livery! Sure to turn heads, the stunning stars and stripes on Ken's replica Ford Fiesta ST RX43 are achieved with actual custom paint! The paint is protected from scratches because it's applied at the factory on the inside of the body, allowing the amazing irridescent color-changing effect to shine through! Easy To Drive! Just Pull The Trigger! The HPI WR8 3.0 is super-easy to drive and get familiar with - all you have to do is install a battery, plug it in and switch on the radio and car. It's that easy! To drive the car, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel - it's as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger to brake the car from insane top speeds to a gentle stop. It takes seconds to get used to this easy operation, and in no time at all you'll be ripping off jaw-dropping moves, just like Ken Block in his nail-biting head-to-head races! Replica fifteen52 Wheels and Real Rubber Tires For the ultimate in replica looks and fantastic performance, every HPI WR8 3.0 with Ken Block's Ford Fiesta ST RX43 is fitted with replica fifteen52 Turbomac wheels in a matching color scheme. The wheels really help the car stand out as a scale replica, and for extreme performance, the wheels are wrapped with semi-slick HPI tires molded in real rubber. The grippy rubber compound helps the car stick to asphalt or tarmac for real racing action, and the treaded design gives you plenty of grip even on dusty paved surfaces! Suspension Just Like Ken's Full-Size Car! Fans of racing cars, from real ones to little ones, know that to get the best out of your car you need to have a sturdy, tuneable suspension system. That's why the HPI Racing WR8 3.0 uses double wishbone suspension at all four corners, fitted with real coil over oil-filled shock absorbers and thick sway bars front and rear, just like real racing cars! Thick main suspension arms are mated to durable uprights fitted with a pair of rubber-sealed ball bearings for performance that matches Ken's Ford Fiesta ST RX43. Full Adjustability Just Like The Real Thing! All this function is nothing if you can't customize the car to your liking. Although we've set the car to be just about perfect right out of the box, you can easily adjust loads of settings, exactly like a real racing car! Ride height, shock angle and more are simple to adjust if you want to dive under the hood - HPI make it easy to be your own race car mechanic AND driver! Drive like Ken, or work on his car: it's easy to do both with the Ken Block WR8 3.0! G3.0 High-Output Nitro Engine The Nitro Star G3.0 H.O. engine is a super-powerful upgraded engine based on the already strong G3.0 used in the HPI Firestorm and Bullet 3.0 trucks. The engine is fitted with a steel flywheel for smooth idling and a racing-style 2-shoe clutch for excellent acceleration and throttle response. If you want instant wheelspin, you've got it! The power from the G3.0 H.O. engine is unbelievable, and with up to 32,000RPM you'll get screamingly fast speeds at the pull of a trigger! A 2-stage air filter protects the carburetor opening from dirt and dust, and the tall forged aluminum heat sink head allows the engine to keep its cool. An all-aluminum exhaust system unlocks the horsepower from the engine and throws out a real trail of engine exhaust at top speed! Go-Fast Parts Galore! The HPI Racing WR8 3.0 is super easy to upgrade to make it faster, more responsive, even cooler-looking, tougher and more durable. Swap the wheels for different styles and colors, change the tires for gravel or other off-road surfaces, add alloy braces and suspension parts, lower the weight with woven graphite options and beef up the drivetrain with hardened steel parts - the choice is yours! Super-High Detailed Replica There's no getting around it: this is an amazingly detailed replica of Ken Block's Ford Fiesta ST RX43! From the front splitter to the rear wing, all the way down to the amazing fifteen52 TurboFan and TurboMac wheels, this car looks JUST like the real thing! Every tiny detail of Ken's real car is replicated in 1/8th scale: the grilles, headlights, the double-level rear wing and spoiler...even the American flag wrapped around the roof air intake! If you want to drive like Ken, you've GOT to have his car, and HPI have the only authorized RC replica of Ken's Ford Fiesta ST RX43 car! Features: Officially authorized replica of Ken Block's "Color-Shift" Ford Fiesta ST RX43 Pre-Assembled 1/8th scale car Based on the Bullet 3.0 monster truck Nitro G3.0 High Output engine with slide carb 2.4GHz radio system Water resistant steering servo Enclosed receiver box 3mm aluminum chassis with centralized weight balance Full-time 4WD for excellent control Efficient and tough shaft drivetrain Front skidplate with durable foam bumper Composite chassis braces for extra driving feel Tough oil-filled 4-gear differentials Replica fifteen52 TurboFan and TurboMac wheels Real rubber semi-slick tires Aluminum shock towers front and rear Oil-filled coil-over shocks with adjustable ride height Front and rear sway bars for excellent handling High ground clearance for driving on most surfaces Mud guards for rear shocks prevent dirt build-up Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver All hex head hardware Full set of rubber-sealed ball bearings #120037 WR8 3.0 KEN BLOCK GYMKHANA FORD FIESTA ST RX43 1/8th Scale 4WD Nitro Rally Car with 2.4GHz Radio Specifications: Length: 485mm (19") Width: 227mm (8.9") Height: 172mm (6.7") Wheelbase: 300mm (11.8") Tire Diameter: 80mm (3.2") Drivetrain: Full-Time Shaft 4WD What You Need: Nitro Fuel 20% Nitro Fuel Bottle Glow Plug Igniter Ford Motor Company Trademarks and Trade Dress used under license to HPI RACING. www.fordmotorcompany.com All commercial and publicity rights to use or market the name 'Ken Block'and '43 Racing, LLC' is licensed exclusively through Wasserman Media Group, LLC. Specification may be subject to change
£479.99 (RRP inc. VAT)
FRONT UNIVERSAL DRIVE SHAFT
FRONT UNIVERSAL DRIVE SHAFT
This Universal Drive Shaft set for the Venture adds extra durability and functionality to the drivetrain. This set replaces the standard straight dogbones and axle drive cups of the front axle with a coupled option, making maintenance easier and strengthening the steering and drive line. Machined from tough steel and built to take a beating!
£27.48 (RRP inc. VAT)
RS4 SPORT 3 CREATOR EDITION
RS4 SPORT 3 CREATOR EDITION
Build Your On-Road Legend with the RS4 Sport 3 Creator EditionThe RS4 Sport 3 Creator Edition is the first HPI Racing car to deliver a completely built, ready to drive chassis, ready for you to add your own choice of body, wheels, tires, and electronics! This is the purest form of on-road RC that is waiting only for YOUR finishing touches to make it into whatever you can dream: muscle car, drifter, street car, sports racer or even a rally car!No matter what kind of on-road action you prefer, you can be on the road and driving in record time!Here's all you need to do to create your own RC dream car:Start with the Ideal Touring Car ChassisThe RS4 Sport 3 chassis is the latest evolution of HPI Racing on-road design. It features a completely sealed and highly efficient ball bearing-supported shaft drivetrain for maximum efficiency combined with reduced maintenance. The suspension design is taken straight from scale and full-size racing technology, with a double wishbone suspension fitted with oil-filled coil-over shock absorbers. The fully sealed drivetrain means there are no exposed gears, belts or drivetrain parts to get stuck with rocks or dirt, and the durable suspension design allows you to tune the car for all types of driving conditions, from club racing to drifting. This is a fully-featured, ready-for-anything car!Choose Your Favorite Replica Body!When you're customizing your RS4 Sport 3 Creator Edition, a crucial step in getting the right look deciding on the right body! It doesn't matter if you're going to build up a muscle car, import, drift or racing car, HPI Racing has a massive selection of amazing replica bodies to choose from! ''MP4'', ''WebM'', or ''Ogg''.Add a Set of Custom WheelsNext, you'll want to choose the right wheel and tire combination - and HPI Racing has a huge selection to choose from! From vintage to modern, shiny chrome to bright green, we've got you covered with 'an amazing array of awesome wheels!'Wrap the Wheels with Performance TiresWith the perfect set of wheels fitted, you'll want to get tires to match what you plan to do! Are you going to drift, race or just show off? It doesn't matter where you're driving, HPI Racing has 'all types of tires for all types of cars!'Add Your Own Electronics!Getting your RS4 Sport 3 Creator Edition moving is super easy, since it just a few things to start driving. For complete control, install the HPI #120042 TF-41 radio set and your choice of HPI servo - we suggest the #120019 HPI SS-30MGWR or the #110650 HPI SS-40WP servos for their high power rating and protection from water. You can also fit any standard-size RC electronics in the chassis, including low-profile racing servos! Choose How Much Power to Strap In!You have plenty of options when it comes to power, also! If you're just starting out with RC, you won't need tons of power, so an HPI motor combination like the '#114712' SC-3SWP2 speed controller is ideal for brushed motors like the '#1144' Saturn 27T or '#1146' Firebolt 15T, which get the car moving quick enough to have some fun.If you're a total speed freak and are ready for the extreme power of 3S brushless power, the RS4 Sport 3 is ready for just about anything that you can fit! If you're an experienced RC driver, we suggest the '#112850' HPI Flux MMH-4000KV motor with the waterproof '#112851' HPI Flux EMH-3S - this option will easily get the car over 60mph (100km/h)! ...can YOU handle the power!?Check out the 'HPI Plazma car battery range' and 'HPI battery charger range' to finish off your RS4 Sport 3 Creator Edition build! Your hobby shop can also help you pick the right battery and charger choices for you. The unique RS4 Sport 3 Creator Edition features a fully pre-built RS4 Sport 3 chassis, which is the latest on-road car design from the minds at HPI Racing! The factory-assembled chassis features a huge amount of high-end features that make it the best on-road car choice for anyone new to RC, coming back to the hobby after a break, or RC experts looking to add a new car to their collection.With full-time 4WD and gear differentials front and rear for excellent traction and control, a completely sealed and highly efficient shaft drivetrain, coil-over shock absorbers and racing suspension, the RS4 Sport 3 has tons of features to make it the ideal platform to get your creativity on the road! Just check out all the fantastic features that come with every RS4 Sport 3! One-Piece Molded ChassisThe main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.Low Profile Layout DesignOne of the ways we gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.2S LiPo CapableThe RS4 Sport 3 features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. Please note a LiPo adapter plug is not included, your model shop will be able to provide one.Fits a Wide Variety of BatteriesThe RS4 Sport 3 chassis can fit lithium-polymer and nickel-cadmium packs of various sizes, including the extra-long 7-cell Ni-MH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration. Full-Time Four-Wheel DriveThe RS4 Sport 3 features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun.Sealed Shaft DrivetrainThe drivetrain of all the RS4 Sport 3 models features the motor mounted longitudinally in the molded chassis, next to the long driveshaft that goes down the center of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency.Bottom-Access DriveshaftThe central driveshaft that connects the front and rear differentials is easily accessed from underneath the chassis. This allows the drivetrain to be completely sealed to protect it from rocks and debris no matter where you may want to drive your car. Easy Access DifferentialsGetting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service. 4-Gear Metal DiffsBevel gear differentials at each end of the car transfer power from the driveshaft to the dogbones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease.Double-Wishbone Fully Adjustable SuspensionThe suspension of the RS4 Sport 3 uses the race-proven double-wishbone suspension design, similar to a full scale modern race car. You'll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.Multiple Shock PositionsOil-Filled Threaded ShocksThe RS4 Sport 3 is fitted with a set composite coilover-style oil-filled shocks, just like what you'd see on a real race car. The fully adjustable shocks are fully tunable to provide the optimum chassis performance on a wide variety of road surfaces. The ride height is quickly adjustable by using the threaded shock collars. Further tuning adjustments are also possible by changing the springs and shock oil weight.Tough Front End SuspensionThe RS4 Sport front end uses the strong C-hub style suspension seen on the latest RC touring cars, with a vertical ball stud camber mount that lets you change the front end roll center - which is a critical racing adjustment that allows the RS4 Sport 3 to be a step above other sport-level RC touring cars. The suspension arm also features multiple shock mounting holes for easy shock angle adjustment.Tunable Rear SuspensionThe rear hub is fitted with a vertical ball stud style adjustment that allows easy adjustment of the rear roll center. Moving the ball stud up or down with the optional spacers changes the traction characteristics of the rear end as the car goes through the turns. The suspension arm also features 3 different shock mounting holes for easy shock angle adjustment.Double Bellcrank SteeringThe performance tested adjustable double bell crank system provides optimum steering precision at all speeds. A metal drag link plate connects the cranks for extra durability, the additional drag link mounting positions also allows for Ackermann angle adjustments.Rugged Spring-Loaded Servo Saver The RS4 Sport 3 includes an adjustable multipiece cam-style servo saver, which protects the servo from crash damage. In the event of a crash or collision, the front wheels usually take a big portion of the blow and transmits the impact directly to the steering servo. The strong spring-loaded cam action of the servo saver is designed to absorb this force and protect the servo gears from the impact!Aluminum Motor MountThe cast aluminum cam-style motor mount holds the motor in place for a secure pinion/spur connection. Two screws hold the cam firmly in position on the mount, and cooling fins on the lateral support aid heat dissipation to keep the motor running as efficiently as possible.Rear End Chassis DiffuserThe built in rear end chassis diffuser element smooths out the air flow underneath the chassis for maximum aero efficiency.Metal-Shielded Ball BearingsThe RS4 Sport 3 is fully fitted with a set of metal-shielded ball bearings for maximum efficiency. The metal shields keep the dust away from the internals while the smooth precision bearings provides for optimum power delivery from the power source out into the driveline.Rugged Front BumperTo protect the front suspension, chassis and body from impacts big and small, an extra thick foam bumper is securely fastened to the front of the RS4 Sport 3.Customize Your LookA huge variety of option bodies, wheels and tires from HPI lets you fully customize the style of your RS4 Sport 3 to suit your style.Adjustable Height Body MountsThe adjustable height body mounts let you fit any 1/10th scale touring car body from HPI Racing on to the RS4 Sport 3 chassis. All you need to do is adjust the front and rear body mounts to allow the wheels and chassis elements to fit properly underneath the body. Body pins hold the mounts in place, and the multiple mounting hole positions allow you to fine-tune the exact body fitment.Body ChoicesYou can fit any 1/10th scale touring car body from HPI Racing onto the RS4 Sport 3, from hot hatches to supercars, pick-up trucks to supertouring racers. All you need to do is adjust the body mounts front and rear to allow the wheels to fit underneath the body properly. A simple system using body pins hold the mounts in place, and you can fine-tune the fit to get the exact ride height you want. Comprehensive Instruction ManualAll HPI Racing kits include a detailed multi-language instruction manual. Exploded diagrams and extensive information about your RS4 Sport 3 ensures that you have the knowhow when it comes to maintaining and upgrading your kit. You can also download a digital version of the manual to your personal electronic device and keep it with you for easy reference on the go.MYhpi: The Ultimate Resource for Your RS4 Sport 3Once you've got your RS4 Sport 3, add it to your MYhpi garage to get direct information about what will make your car faster, more adjustable and easier to tune. Add your entire HPI collection to your MYhpi garage so you can directly access manuals, videos, tips and help for each of your HPI cars!'#118000' RS4 SPORT 3 CREATOR EDITION1/10th Scale Pre-Assembled 4WD Touring Car ChassisSpecifications:Length: 431mm (17")Height: 127mm (5")Width: 190mm (7.5")Wheelbase: 254mm (10")Specifications are approximate and vary based on your choice of body and wheelsRequires these items, not included:1/10th scale touring car bodyTouring car wheels & tires2-channel surface RC radio systemSteering servoElectronic Speed ControllerMotorPinion gear ('#6932' recommended)6-7 cell NiMH or 2S-3S LiPo battery for carBattery chargerSpecification may be subject to change
£129.99 (RRP inc. VAT)
AXLE WEIGHTS (12 GRAMS EA.)
AXLE WEIGHTS (12 GRAMS EA.)
A pair of Venture axle weights that are mounted inside the axle for extra mass as low as possible in your truck. The hollow weights fit over the driveshaft inside the axle housing, so the weights are hidden from sight. Each weight is 12g each, and 2 weights will fit on each axle - adding 24g on each axle.
£6.99 (RRP inc. VAT)
JUMPSHOT SC BODY (CLEAR)
JUMPSHOT SC BODY (CLEAR)
Totally change the look of your Jumpshot SC truck by adding a custom paint scheme! With a clear bodyshell, you are totally free to have an all-new design and colour combination on your Jumpshot! This replacement body is moulded from super-tough clear polycarbonate plastic for toughness and resilience in the roughest of conditions. All HPI bodies feature clear overspray film to keep paint and marks off the outside of the body, moulded markings for easy body post drilling, pre-cut vinyl window masks, true-to-life decals and a full set of official HPI logos! Photorealistic die-cut premium vinyl decals include window frames, headlights, grill, tail lights and more, plus official logos! Overspray film and pre-cut vinyl window masks make painting fast and simple Dimple marks for body post locations Molded from strong clear polycarbonate plastic for durability and long life Clear body (finished example shown)
£30.99 (RRP inc. VAT)
JUMPSHOT ST BODY (CLEAR)
JUMPSHOT ST BODY (CLEAR)
Totally change the look of your Jumpshot ST truck by adding a custom paint scheme! With a clear bodyshell, you are totally free to have an all-new design and colour combination on your Jumpshot! This replacement body is moulded from super-tough clear polycarbonate plastic for toughness and resilience in the roughest of conditions. All HPI bodies feature clear overspray film to keep paint and marks off the outside of the body, moulded markings for easy body post drilling, pre-cut vinyl window masks, true-to-life decals and a full set of official HPI logos! Photorealistic die-cut premium vinyl decals include window frames, headlights, grill, tail lights and more, plus official logos! Overspray film and pre-cut vinyl window masks make painting fast and simple Dimple marks for body post locations Molded from strong clear polycarbonate plastic for durability and long life Clear body (finished example shown)
£21.99 (RRP inc. VAT)
NITRO STAR F5.9 ENGINE WITH PULLSTART
NITRO STAR F5.9 ENGINE WITH PULLSTART
5.9CC/COMPOSITE SLIDE CARB./REAR EXHAUST/PULLSTART/INCLUDES AIR CLEANER AND GLOW PLUG (R5)
£175.00 (RRP inc. VAT)
1968 CHEVROLET CAMARO BODY (200MM)
1968 CHEVROLET CAMARO BODY (200MM)
REAR TRACK 210MM WHEELBASE 255MM
£27.99 (RRP inc. VAT)
VENTURE UNIVERSAL WHEEL WELL
VENTURE UNIVERSAL WHEEL WELL
The Venture Universal Wheel Well set is the ideal way to help keep the inside of your Venture clean, plus it helps add extra realism to your rig at the same time! Made from clear, flexible and lightweight polycarbonate, simply cut out and paint in your desired color (using RC polycarbonate paint) for an awesome scale look. Once the set is installed on your chassis, you can tackle river crossings and mud pits with the knowledge that cleaning your Venture when you're back in your scale garage just got a whole lot easier. Finished and painted example shown. Includes instructions and mounting hardware. Molded from crystal clear polycarbonate plastic Custom fitted to Venture chassis Adds to scale realism Helps keep truck interior clean Includes instructions and mounting hardware
£22.98 (RRP inc. VAT)
FIFTEEN52 TARMAC R43 WHEEL 48X31MM (10MM OS/2PCS)
FIFTEEN52 TARMAC R43 WHEEL 48X31MM (10MM OS/2PCS)
10mm offset replica fifteen52 Tarmac R43 31mm bronze wheel as fitted to the RS4 Sport 3 Hoonicorn 1965 Ford Mustang #115990 Custom-forged and machined by the custom wheel experts at fifteen52, the amazing 3-piece R43 wheels are replicated in exacting 1/10th scale directly from the original CAD files, so each and every Hoonicorn RTR replica has the perfect look and street stance. The real 18" x 10.5" wheels are made from machined forged 6061 aluminum centers and forged stepped & polished lips, while the replica is molded in high-impact nylon in a custom gold color.
£8.99 (RRP inc. VAT)
FIFTEEN52 TARMAC R43 WHEEL 48X31MM (15MM OS/2PCS)
FIFTEEN52 TARMAC R43 WHEEL 48X31MM (15MM OS/2PCS)
15mm offset replica fifteen52 Tarmac R43 31mm bronze wheel as fitted to the RS4 Sport 3 Hoonicorn 1965 Ford Mustang #115990 Custom-forged and machined by the custom wheel experts at fifteen52, the amazing 3-piece R43 wheels are replicated in exacting 1/10th scale directly from the original CAD files, so each and every Hoonicorn RTR replica has the perfect look and street stance. The real 18" x 10.5" wheels are made from machined forged 6061 aluminum centers and forged stepped & polished lips, while the replica is molded in high-impact nylon in a custom gold color.
£8.99 (RRP inc. VAT)
HPI WIDE RADIAL GRIP TIRE 31MM (2PCS)
HPI WIDE RADIAL GRIP TIRE 31MM (2PCS)
HPI Wide Radial Grip Tire Set for the fifteen52 Tarmac R43 bronze wheels as fitted to the RS4 Sport 3 Hoonicorn 1965 Ford Mustang #115990 295/30/18 - magic numbers that give the technical side of Ken Block's full-size hoops that are fitted to all four corners of the Hoonicorn RTR. But numbers can't tell the whole story - especially when these tires are made in a custom compound especially for Ken Block himself! The replica tires look exactly like the real thing: extra-wide, semi-slick and super-cool! The scale tires are molded in a durable, long-wearing rubber compound that gives enough grip for awesome acceleration!
£9.50 (RRP inc. VAT)
RS4 SPORT 3 1965 HOONICORN FORD MUSTANG 1/10 4WD ELECTRIC CAR
RS4 SPORT 3 1965 HOONICORN FORD MUSTANG 1/10 4WD ELECTRIC CAR
RS4 Sport 3 Featuring the Amazing and Thrilling Hoonicorn RTR! The full-size Hoonicorn RTR is the amazing car featured in Ken Block's Gymkhana SEVEN video that sent the motorsport fans into a frenzy - and now YOU can have a 1/10th scale version to drive yourself! Replicating the chopped, slammed and massaged look of the real 1965 Ford Mustang the Hoonicorn RTR is based on, the official HPI Racing replica version features the same gigantic supercharger air scoop, same paint scheme and even the same wheels as the real thing! With a high-traction full-time shaft 4WD providing the go power, this electric-powered version will let you pull off the same wild action as Ken Block himself - in 1/10th the size! There will only ever be one Hoonicorn RTR - but now YOU could be driving the official scale radio-control replica! The full-size Hoonicorn RTR is a totally custom, all-out drift machine that was designed by Formula Drift champion Vaughn Gittin Jr.'s RTR design studio and built by ASD Motorsports over 2 years to exacting specifications. It's fitted with a monstrous 410 cubic inch V8 putting out nearly 850 horsepower at a screaming 9000RPM. The engine is mated to a 6-speed Dakar Rally-spec transmission and 4WD drivetrain, with a completely custom adjustable suspension, and 3-piece fifteen52 wheels wrapped with super-wide 18-inch tires made in a custom compound just for Ken Block himself. You can read about the inspiration and design of the one-of-a-kind Hoonicorn RTR in this Speedhunters special article by Vaughn Gittin Jr! fifteen52 R43 Replica 3 Piece Wheels Custom-forged and machined by the custom wheel experts at fifteen52, the amazing 3-piece R43 wheels are replicated in exacting 1/10th scale directly from the original CAD files, so each and every Hoonicorn RTR replica has the perfect look and street stance. The real 18" x 10.5" wheels are made from machined forged 6061 aluminum centers and forged stepped & polished lips, while the replica is molded in high-impact nylon in a custom gold color. Replica Hoonicorn Tires 295/30/18 - magic numbers that give the technical side of Ken Block's full-size hoops that are fitted to all four corners of the Hoonicorn RTR. But numbers can't tell the whole story - especially when these tires are made in a custom compound especially for Ken Block himself! The replica tires look exactly like the real thing: extra-wide, semi-slick and super-cool! The scale tires are molded in a durable, long-wearing rubber compound that gives enough grip for awesome acceleration! Official Replica of the Amazing, Custom Hoonicorn RTR Taking the full-size Hoonicorn RTR with its handmade custom body and making it 1/10th scale was a major challenge for the HPI design team, but after months of hard work with scale drawings and hundreds of pictures of the real car, we're proud to call the 1/10th scale Hoonicorn RTR one of HPI's finest achievements. The replica wheels were even made with the help of the original fifteen52 CAD files to replicate their Ken Block special R43 wheels to complete the Hoonicorn's look, and each wheel is wrapped in a scale replica extra-wide semi-slick rubber tires. Underneath all this detail and awesomeness is the RS4 Sport 3 chassis, the latest scale touring car chassis from HPI Racing! The HPI RS4 Sport 3 chassis features full-time 4WD, a completely sealed and highly efficient shaft drivetrain, coilover shock absorbers plus waterproof electronics. The fully contained drivetrain means there are no exposed gears, belts or drivetrain parts to get stuck with rocks or dirt. The car is completely assembled and fitted with the 1965 Ford Mustang Hoonicorn RTR body and fifteen52 wheels right out of the box, so all you have to do is PLUG IN AND DRIVE! One-Piece Molded Chassis The main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today. Low Profile Layout Design One of the ways we gave the RS4 Sport 3 Drift the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for optimum cornering capabilities. 2S LiPo Capable The RS4 Sport 3 Drift features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. Please note a LiPo adapter plug is not included, your model shop will be able to provide one. Fits a Wide Variety of Batteries The RS4 Sport 3 Drift chassis can fit lithium-polymer (LiPo) and nickel-metal hydride (NiMH) packs of various sizes, including the extra-long 7-cell NiMH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration. Full-Time Four-Wheel Drive The RS4 Sport 3 Drift features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun. Sealed Shaft Drivetrain The drivetrain of all the RS4 Sport 3 Drift models features the motor mounted longitudinally in the molded chassis, next to the long driveshaft that goes down the center of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency. Bottom-Access Driveshaft The central driveshaft that connects the front and rear differentials is easily accessed from underneath the chassis. This allows the drivetrain to be completely sealed to protect it from rocks and debris no matter where you may want to drive your car. Easy Access Differentials Getting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service. 4-Gear Metal Diffs Bevel gear differentials at each end of the car transfer power from the driveshaft to the dogbones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease. Double-Wishbone Fully Adjustable Suspension The suspension of the RS4 Sport 3 Drift uses the race-proven double-wishbone suspension design, similar to a full-scale modern race car. You'll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions. Oil-Filled Threaded Shocks The RS4 Sport 3 Drift is fitted with a set composite coilover-style oil-filled shocks, just like what you'd see on a real race car! The fully adjustable shocks are fully tunable to provide the optimum chassis performance on a wide variety of road surfaces. The ride height is quickly adjustable by using the threaded shock collars. Further tuning adjustments are also possible by changing the springs and shock oil weight. Tough Front End Suspension The RS4 Sport 3 Drift front end uses the strong C-hub style suspension seen on the latest RC touring cars, with a vertical ball stud camber mount that lets you change the front end roll center - which is a critical racing adjustment that allows the RS4 Sport 3 Drift to be a step above other sport-level RC touring cars. The suspension arm also features multiple shock mounting holes for easy shock angle adjustment. Tunable Rear Suspension The rear hub is fitted with a vertical ball stud style adjustment that allows easy adjustment of the rear roll center. Moving the ball stud up or down with the optional spacers changes the traction characteristics of the rear end as the car goes through the turns. The suspension arm also features 3 different shock mounting holes for easy shock angle adjustment. Double Bellcrank Steering The performance tested adjustable double bell crank system provides optimum steering precision at all speeds. A metal drag link plate connects the cranks for extra durability, the additional drag link mounting positions also allows for Ackermann angle adjustments. Rugged Spring-Loaded Servo Saver The RS4 Sport 3 includes an adjustable multipiece cam-style servo saver, which protects the servo from crash damage. In the event of a crash or collision, the front wheels usually take a big portion of the blow and transmits the impact directly to the steering servo. The strong spring-loaded cam action of the servo saver is designed to absorb this force and protect the servo gears from the impact! Aluminum Motor Mount The cast aluminum cam-style motor mount holds the motor in place for a secure pinion/spur connection. Two screws hold the cam firmly in position on the mount, and cooling fins on the lateral support aid heat dissipation to keep the motor running as efficiently as possible. Rear End Chassis Diffuser The built in rear end chassis diffuser element smooths out the air flow underneath the chassis for maximum aero efficiency. Metal-Shielded Ball Bearings The RS4 Sport 3 is fully fitted with a set of metal-shielded ball bearings for maximum efficiency. The metal shields keep the dust away from the internals while the smooth precision bearings provides for optimum power delivery from the power source out into the driveline. Rugged Front Bumper To protect the front suspension, chassis and body from impacts big and small, an extra thick foam bumper is securely fastened to the front of the RS4 Sport 3. Customize Your Look A huge variety of option bodies, wheels and tires from HPI lets you fully customize the style of your RS4 Sport 3 to suit your style. Adjustable Height Body Mounts The adjustable height body mounts let you fit any 1/10th scale touring car body from HPI Racing on to the RS4 Sport 3 chassis. All you need to do is adjust the front and rear body mounts to allow the wheels and chassis elements to fit properly underneath the body. Body pins hold the mounts in place, and the multiple mounting hole positions allow you to fine-tune the exact body fitment. Body Choices You can fit any 1/10th scale touring car body from HPI Racing onto the RS4 Sport 3, from hot hatches to supercars, pick-up trucks to supertouring racers. All you need to do is adjust the body mounts front and rear to allow the wheels to fit underneath the body properly. A simple system using body pins hold the mounts in place, and you can fine-tune the fit to get the exact ride height you want. Comprehensive Instruction Manual All HPI Racing kits include a detailed multi-language instruction manual. Exploded diagrams and extensive information about your RS4 Sport 3 ensures that you have the knowhow when it comes to maintaining and upgrading your kit. You can also download a digital version of the manual to your personal electronic device and keep it with you for easy reference on the go. MYhpi: The Ultimate Resource for Your RS4 Sport 3 Once you've got your RS4 Sport 3, add it to your MYhpi garage to get direct information about what will make your car faster, more adjustable and easier to tune. Add your entire HPI collection to your MYhpi garage so you can directly access manuals, videos, tips and help for each of your HPI cars! #115990 RS4 SPORT 3 RTR 1965 FORD MUSTANG HOONICORN RTR 1/10th Scale Pre-Assembled 4WD Touring Car with 2.4GHz Radio System and Painted 1965 Ford Mustang Hoonicorn RTR Body Specifications: Length: 431mm (17") Height: 127mm (5") Width: 200mm (7.9") Wheelbase: 254mm (10") Includes: 4 AA batteries 7.2v 2000 mAh NiMH battery with standard plug Wall battery charger Specification may be subject to change
£299.99 (RRP inc. VAT)
FLUX GT-5 GIGANTE TRUCK PAINTED BODY
FLUX GT-5 GIGANTE TRUCK PAINTED BODY
Refresh the look of your Savage XL Flux with this easy to install replacement body! This body is a replacement for #112609 - Savage XL FLUX RTR, and comes trimmed, pre-painted, and decaled, exactly as it comes on the kit.
£41.99 (RRP inc. VAT)
JUMPSHOT SC BODY (PAINTED)
JUMPSHOT SC BODY (PAINTED)
Refresh the look of your Jumpshot SC with this easy to install replacement body! Fully painted, detailed and cut out, this OEM replacement body is formed from light, flexible and highly durable polycarbonate plastic, then painted with special flexible paints for an authentic look.
£38.99 (RRP inc. VAT)
JUMPSHOT ST BODY (PAINTED)
JUMPSHOT ST BODY (PAINTED)
Refresh the look of your Jumpshot ST with this easy to install replacement body! Fully painted, detailed and cut out, this OEM replacement body is formed from light, flexible and highly durable polycarbonate plastic, then painted with special flexible paints for an authentic look.
£28.98 (RRP inc. VAT)

sort by:
items per page: 12, 24, 36, 48, 72
...
1
< prev
pages (155):