SFL-30MG DIGITAL SERVO (HIGH TORQUE/18KG-CM 6.0V)
BAJA 5B/BAJA 5T/DIGITAL FET HIGH TORQUE SERVO, METAL GEAR, 25 SPLINE

HPI SF-32TT DIGITAL SERVO(HIGHTORQUE/24KG-CM 6.0V)
HIGH TORQUE SERVO/TITANIUM GEAR/25 SPLINE

FLUX RELOAD ESC PROGRAM BOX V2
LCD stand alone programmer for ESC, USB PC connectivity

SFL-11MGWP SERVO (WATERPROOF/24.7KG-CM 6.0V)
HIGH TORQUE WATER PROOF SERVO/FUTABA J CONNECTOR/METAL OUTPUT GEAR

FLUX PRO ESC FAN
SPARE PART FOR 101830 FLUX PRO COMPETITION ESC

FLUX PRO COMPETITION ELECTRONIC SPEED CONTROL
2S-3S LIPO SENSORED ESC. 3.5T MOTOR LIMIT.FULLY PROGRAMMABLE REQUIRES USE OF 101856.

PRO SINTERED 12.5MM ROTOR
FLUX PRO SERIES MOTOR ACCESORIES

HPI TF-40 / RF-40 2.4GHZ RADIO SET
Use the comfortable and feature-packed HPI TF-40 2.4GHz radio system for supreme control and confidence when controlling your car or truck kit! The HPI TF-40 radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car! You will be able to confidently drive your HPI kit with other drivers without worrying about things like frequencies or radio conflicts. This is a fully-featured, lightweight, 3-channel radio with advanced ergonomic features and total adjustability. Set the radio up for your car with custom features like servo reversing, centre trim, end point adjustments, dual rate and more. Only 4 AA batteries are required to power the TF-40, so it's light in your hands, and the drop-down steering wheel makes it comfortable to hole. With the adjustable, built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. TF-40 Radio FeaturesDigital 2.4GHz technology Automatic frequency-hopping design finds channels without interference Run your HPI kit with other drivers without worrying about frequencies! Adjustable built-in failsafe 3 channel Drop-down steering wheel design for improved comfort and racer feel Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle ) Light weight (only 4 AA batteries required) Simple switch for legal use in France Please note: The TF-40 transmitter will not work with the RF-20 or RF-30 2.4GHz receivers.

PLAZMAPRO 7.4V 5600mAh 95C LiPo BatteryPack 40.7Wh
2S HIGH PERFORMANCE LIPO IN RECTANGULAR SADDLE PACK CASE WITH 4MM TUBES

PLAZMA 14.8V 5100mAh 40C LiPo Battery Pack 75.48Wh
4S LiPo in Large Rectangular Case with Authentic Deans Plug & JST-XH Balance Lead

PLAZMA 7.2V 4700mAh Ni-MH Battery Pack 33.84Wh
6 CELL NI-MH STICK PACK WITH TAMIYA CONNECTOR

PLAZMA 8.4V 3300MAH NI-MH BATTERY PACK 27.72WH
7 CELL NI-MH STICK PACK WITH TAMIYA CONNECTOR

PLAZMA 7.4V 8000mAh 35C LiPo Battery Pack 59.2Wh
2S LiPo in special SAVAGE Flux Case with Authentic Deans Plug & JST-XH Balance Lead

PLAZMA 11.1V 3200mAh 35C LiPo Battery Pack 35.52Wh
3S LiPo in Rectangular Case with Authentic Deans Plug & JST-XH Balance Lead

PLAZMA 11.1V 5600mAh 50C LiPo Battery Pack 62.16Wh
3S LiPo in special SAVAGE Flux Case with Authentic Deans Plug & JST-XH Balance Lead

FLUX VEKTOR 5900KV BRUSHLESS MOTOR
Upgrade to a zero-maintenance brushless Flux Vektor 5900Kv motor for the ultimate in performance and ease of use! The Flux Vektor 5900Kv brushless motor is standard equipment in the updated Sprint 2 Flux kits, making it the perfect partner for any Sprint 2, club racer or touring car for fun running. It can handle 7.4 volt (2S) LiPo batteries as well as 7.2v NiMH batteries for a range of possibilities! It's also fitted with brass bullet connectors that allow it to plug directly into the Flux Vapor speed controller for total ease of use and a simple package upgrade for any car or truck fitted with a brushed motor system. FEATURES:High torque/high temperature neodymium magnet Oversized precision sealed bearings 2.3mm 1/8" hardened steel shaft 4 Pole rotor for more torque Triple insulated windings for long life Black anodized case Easy to Install Compatible with any sensorless ESC Use with the #106627 Flux Vapor waterproof ESC for best performance

FLUX VEKTOR 4000KV BRUSHLESS MOTOR
Upgrade to a zero-maintenance brushless Flux Vektor 4000Kv motor for the ultimate in performance and ease of use! The Flux Vektor 4000Kv brushless motor is standard equipment in the Savage XS Flux, making it the perfect partner for any off-road vehicle for fun running. It can handle 7.4 volt (2S) or 11.1 (3S) LiPo batteries as well as 7.2v NiMH batteries for a range of possibilities! It's also fitted with brass bullet connectors that allow it to plug directly into the Flux Vapor Pro speed controller for total ease of use and a simple package upgrade for any car or truck fitted with a brushed motor system. FEATURES:High torque/high temperature neodymium magnet Oversized precision sealed bearings 2.3mm 1/8" hardened steel shaft 4 Pole rotor for more torque Triple insulated windings for long life Black anodized case Easy to Install Compatible with any sensorless ESC Use with the #106627 Flux Vapor or #106767 Flux Vapor Pro waterproof ESC for best performance

HPI SB-5 SERVO (METAL GEAR/11.8KG-CM 6.0V)
This quick and powerful servo is an ideal upgrade or replacement servo for hardcore RC enthusiasts looking for a stronger and faster servo to replace the stock steering or throttle servo on their vehicle. With metal gears, it's one of our best value servos, perfect for just about any application!

Flux Rage 1:8th scale 80Amp Brushless ESC
Use with FLUX SCREAM brushless motor

Flux Scream 1:8th scale 1965 KV Brushless Motor
1965 RPM/VOLT / USE WITH FLUX RAGE ESC

HPI RF-30 RECEIVER (2.4GHZ /2CH/6V 5CELL BATTERY)
2.4GHZ RECEIVER FOR TF-20 TRANSMITTER / ONBOARD BATTERY FAILSAFE (ONLY USE FOR 6V 5CELL) / FOR SF SERVO

HPI TF-40 2.4GHZ TRANSMITTER (2CH)
Use the comfortable and feature-packed HPI TF-40 2.4GHz radio system for supreme control and confidence when controlling your car or truck kit! The HPI TF-40 radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car! You will be able to confidently drive your HPI kit with other drivers without worrying about things like frequencies or radio conflicts. This is a fully-featured, lightweight, 3-channel radio with advanced ergonomic features and total adjustability. Set the radio up for your car with custom features like servo reversing, centre trim, end point adjustments, dual rate and more. Only 4 AA batteries are required to power the TF-40, so it's light in your hands, and the drop-down steering wheel makes it comfortable to hole. With the adjustable, built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. TF-40 Radio FeaturesDigital 2.4GHz technology Run your HPI kit with other drivers without worrying about frequencies! Adjustable built-in failsafe 3 channel Drop-down steering wheel design for improved comfort and racer feel Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle ) Light weight (only 4 AA batteries required) Simple switch for legal use in FranceUse with #105383 RF-40 2.4GHz receiver in RC vehicles with electronic speed controllers with BEC (Battery Eliminator Circuitry), or nitro/petrol kits that use 4 cell (6V) receiver packs. The TF-40 is also available bundled with the RF-40 in the #105385 HPI TF-40 / RF-40 2.4GHz RADIO SET! Please note: This transmitter will not work with the RF-30 2.4GHz receiver, the RF-30 is designed for use only with the TF-20 radio.

HPI RF-40 RECEIVER (2.4GHZ/3CH)
USE WITH HPI TF-40 TRANSMITTER

SC-15WP WATERPROOF ELECTRONIC SPEED CONTROL
REVERSABLE SPEED CONTROL WITH LIPO CUT-OFF. USE WITH BRUSHED MOTORS DOWN TO 15 TURN.