Turnbuckle Adjusting Tool (3.6 or 4mm Hex)
Turnbuckle Adjusting Tool (3.6 or 4mm Hex)

HB Lightning Series Hard Anodised Rear Hubs (1 Degree) (Pair)
These 1 degree rear hubs allow the tuning of the 'outboard toe-in' of your Hot Bodies D8 or Lightning buggy/truggy. Useful for bumpy terrain where you need to run as little as possible inboard toe-in. Features:CNC Manufactured from high quality 7075 alloy. Durable, cool grey hard anodised finish. Easy to identify markings. Super smooth fit. PRO-TIP: For maximum tuning, use HPI Z813, 814, 815, 816, 817, 818, 819 washers to adjust wheel base. (You'll need 8mm in total) Highly Recommended: Use 'Edit' - 54mm or 56mm Rear toe-In bracket (#ED010071, #ED010081) with this item.

HB Lightning Series Hard Anodised Rear Hubs (2 Degree) (Pair)
These 2 degree rear hubs allow the tuning of the 'outboard toe-in' of your Hot Bodies D8 or Lightning buggy/truggy. Useful for bumpy terrain where you need to run as little as possible inboard toe-in. Features:CNC machined from high quality 7075 alloy. Durable, cool grey hard anodised finish. Easy to identify markings. Super smooth fit. PRO-TIP: For maximum tuning, use HPI #HPZ813, #HPZ814, #HPZ815, #HPZ816, #HPZ817, #HPZ818, #HPZ819 washers to adjust wheel base. (You'll need 8mm in total) Highly Recommended: Use 'Edit' - 54mm or 56mm Rear toe-In bracket (#ED010071, #ED010081) with this item.

HB Lightning Series Hard Anodised Rear Hubs (3 Degree) (Pair)
These 3 degree rear hubs allow the tuning of the 'outboard toe-in' of your Hot Bodies D8 or Lightning buggy/truggy. Useful for bumpy terrain where you need to run as little as possible inboard toe-in. Features:CNC Manufactured from high quality 7075 alloy. Durable, cool grey hard anodised finish. Easy to identify markings. Super smooth fit. PRO-TIP: For maximum tuning, use HPI Z813, 814, 815, 816, 817, 818, 819 washers to adjust wheel base. (You'll need 8mm in total) Highly Recommended: Use 'Edit' - 54mm or 56mm Rear toe-In bracket (#ED010071, #ED010081) with this item.

HB Lightning Series Hard Anodised Rear Toe-in Bracket (54mm)
This item sets the inboard toe-in of the HB Lightning series vehicles to 0 degrees. Useful for bumpy tracks. Or when grip is high and 'traction rolls' are not required. Features:CNC Machined from high quality 7075 alloy Durable, cool grey hard anodise finish. Easy to identify markings Super smooth fit. PRO-TIP: Use 'Edit' - 2 or 3 Degree Rear Hubs (#ED010051, #ED010061) with this item.

HB Lightning Series Hard Anodised Rear Toe-in Bracket (56mm)
This item sets the inboard toe-in of the HB Lightning series vehicles to ~1.5 degrees. Useful for fairly flat tracks or when conditions are 'greasy' when you require more on-power traction. Features:CNC Machined from high quality 7075 alloy Durable, cool grey hard anodised finish. Easy to identify markings Super smooth fit. PRO-TIP: Use 'Edit' - 2 or 3 Degree Rear Hubs (#ED010051, #ED010061) with this item.

HB Lightning Series Hard Anodised Rear Toe-in Bracket (59mm)
This item sets the inboard toe-in of the HB Lightning series vehicles to ~2.5 degrees. Useful for when grip is low and more on-power traction is required. Features:CNC Machined from high quality 7075 alloy Durable, cool grey hard anodised finish. Easy to identify markings Super smooth fit. PRO-TIP: Use 'Edit' - 1 or 2 Degree Rear Hubs (#ED010041, #ED010051) with this item. You will need to use narrow (5mm) rear hexes with this item on HB Lightning Buggy Series to fit within the BRCA dimension limits. (#HBC8039-2)

HPI Nitro Rush Hard Anodised Alloy Knuckle Arms (Pair)
Beef up your Nitro Rush or Nitro Rush Evo with these knuckle arms. More durable than standard items. Also available #ED010111 Castor block. Features:Precision CNC machined from 7075 Alloy. Cool grey hard anodised finish. Closer tolerances reduces play in suspension. Accepts standard axle (HPI #72132) Will accept standard Z593 screw (Only if using standard plastic castor blocks) PRO-TIP: Replace your existing ball ends with new ones (HPI #Z136) when fitting this component.

HPI Nitro Rush Hard Anodised Alloy Castor Blocks (Pair)
Beef up your Nitro Rush or Nitro Rush Evo with these castor blocks. More durable than standard items. Also available #ED010101 Knuckle arm. Features:Precision CNC machined from 7075 Alloy. Cool grey hard anodised finish. Closer tolerances reduces play in suspension. PRO-TIP: Replace your existing ball ends with new ones (HPZ136) when fitting this component. Will NOT accept standard Z593 screw. (Use HPI Hinge pin set #HP72200) Coming soon 'Edit' Hinge pin set.

HB Lightning Alloy Centre Diff Mounts (Stadium, GTX & GTX2)
Keeping your transmission free and efficient is the key to acceleration and top speed. These centre diff mounts keep the bearings aligned and grip the bearings just the right to ensure the bearings work correctly. These mounts are also stiffer than standard providing extra chassis rigidity.Precision CNC machined from 7075 Alloy. Mass kept to a minimum whilst retaining maximum strength. Correct bearing fit to provide maximum power transmission and effieciency. PRO-TIP: Existing screws can be used to mount the brake pad assembly. However, use HPZ621 to fix this component to the main chassis. Use HPZ350 or Z541 to fix the brake plate to this component. Existing HB screws must NOT be used in this area.

HB Lightning Alloy Centre Diff Mounts (Buggy, RR & Pro)
Keeping your transmission free and efficient is the key to acceleration and top speed. These centre diff mounts keep the bearings aligned and grip the bearings just the right to ensure the bearings work correctly. These mounts are also stiffer than standard providing extra chassis rigidity.Precision CNC machined from 7075 Alloy. Mass kept to a minimum whilst retaining maximum strength. Correct bearing fit to provide maximum power transmission and effieciency. PRO-TIP: Existing screws can be used to mount the brake pad assembly. However, use HPZ621 to fix this component to the main chassis. Use HPZ350 or Z541 to fix the brake plate to this component. Existing HB screws must NOT be used in this area.

Alloy Steering Bellcrank Set (All Lightning Series)
Oily and deteriorated plastic servo savers can make your servo saver feel loose. Strengthen up your steering and increase steering consistency with this steering set. Features:Precision CNC Machined from 7075 Alloy. Retro-fit existing HB parts. Weight kept to a minimum without compromising strength. PRO-TIP: Use HPB020 Bearings or HBC8088 Bearing set to reduce steering assembly friction.

HB Lightning Series Threaded Shock Body Set (Front) (Buggy Only)
Fine adjustments are the key to winning races. These threaded shock bodies allow you to 'dial-in' exactly the correct amount of pre-load on your spring to give you the correct ride height for your chosen terrain. These shocks are for the front of the HB Lightning Buggy Series only. Features:CNC Precision Machined. Hard anodised in a cool grey finish. Retro-fit existing HB parts, no extras required. PRO-TIP: You can use your old 'O' rings and circlips. But, for maximum performance, give your shocks a new lease of life fit HBC8106-2. Recommended #ED030012 Titanium Shock Shaft

HB Lightning Stadium Shock Tower (Front or Rear)
Maximise the tuning of your HB Lightning Stadium, GT or GTX2. Race engineered & tested shock positions to cope with bumpy terrain and revised camber link positions allow you to corner faster and safer than before, lowering your lap times. Features:Precision CNC manufactured from 7075 Alloy. Cool grey hard anodised finish. Revised geometry for faster lap times. PRO-TIP: To use the top mount holes, use a new HBC8190 Body mount set to lift your body to accomodate the new shock tower.

Firestorm Alloy Castor Blocks (25 Degrees) (Pair)
Firestorm Alloy Castor Blocks (25 Degrees) (Pair)

Firestorm Alloy Rear Hubs (Pair)
Firestorm Alloy Rear Hubs (Pair)

Firestorm Alloy Bulkhead
Firestorm Alloy Bulkhead

Clip-On Alloy Heatsink w/Fan Mounting
Suitable for all brushed and brushless motors. Suitable for 25mm Fan

Flat Pack Shock Stand for Touring Car Shocks
Foldaway shock stand / car stand. Holds 4 shocks. TC Size

Aluminium Damper Set (55mm) (2pcs)
Performance upgrade to standard plastic damper sets on 1/10th scale Touring Cars.

Lightweight Differential Hub Set for Cyclone D4
Reduces rotating mass by 16g. (52%) (Requires 1 x HB61333 Diff Cup Joint Adapter)

Lightweight Slipper Hub Set for Cyclone D4
Reduces rotating mass by 10g. (52%) (Requires 1 x HB61333 Diff Cup Joint Adapter)

Cyclone 12 Front Ride Height Spacer Set
(4 x 1.0mm Spacer + 4 x 0.5mm Spacer)

Cyclone D4 Front Brace Extra Duty (7075 Alloy)
Hard Alloy Brace for improved durability.