e-Trade
Contact
Company Info
Support
Shop Search
e-newsletter
downloads
Browse by Brand:
Car
Flight
Electrics
General Accessories
Fuel
 #10056 - RTR NITRO RS4 3 EVO+ WITH GREDDY 350Z BODY # 10056 - RTR NITRO RS4 3 EVO+ WITH GREDDY 350Z BODY
This part is discontinued and replaced by #10059 Pre-assembled 1/10th scale 4WD nitro powered car with T3.0 engine, radio set, two-speed transmission, ball bearings, painted & finished body.HPI's most popular Nitro RTR car gets even faster! We've updated the amazing Nitro RS4 RTR 3 Evo with some new bodyshells and an even faster engine, for maximum fun and excitement! The Nitro RS4 line of cars has historically been aimed directly at the beginner- to intermediate-level RC hobbyist, the driver who wants a fast car that's ready-made to go out and thrash the pavement! With this latest version, we've added the hot new T3.0 engine to the Nitro 3 RTR + to give it a huge boost in power! The T3.0 is based on the potent G3.0 from the Firestorm 10T stadium racing truck, so you know it's going to be fast! The Nitro RS4 RTR 3 Evo + gets its owner out on the track quick with maximum fun and minimal hassle! The car is completely factory-assembled, requiring just a few minutes' worth of final prep to get it running. Radio gear is already installed and the engine is factory-set to make it as easy as possible to start up. The tyres are glued onto the wheels and the body is pre-painted and cut out, with decals already applied. It doesn't get any easier to have top-speed fun with your mates! The Nitro Star T3.0 engine is fitted with a two-stage air filter to provide the most protection possible in dusty or dirty conditions. An aluminium tuned pipe helps get as much power out of the T3.0 as possible, while giving the car a powerful grunt that's unmistakeable! A strong 2-speed transmission system spins the durable and proven shaft drivetrain. Using a 2-speed tranny assures you of quick acceleration and corner exits as well as maximum top speed! Sealed ball bearings keep everything running efficiently so you get as much runtime as possible. A thick countersunk aluminium chassis provides a solid backbone to the car, and the removable radio tray makes it easy to give everything a quick wipe after you're done at the track. To keep things under control, the Nitro RS4 RTR 3 Evo + uses real oil-filled shocks, just like the high-end racing cars! The Nitro RS4 RTR 3 Evo + is the latest chapter in the HPI nitro story - it continues the HPI tradition of tough, easy to use and dependable cars that are fun to run and a joy to own! A full range of option parts, ranging from woven graphite shock towers and upper deck to aluminium-body shocks, is available to pimp out the car and make it the most unique at your club! #10055 - Honda NSX GT #10056 - Nissan Greddy 350Z #10057 - Ford '66 Mustang GT #10058 - Plymouth AAR 'Cuda #10076 - Fujitsubo HPI Impreza      
 NITRO STAR T3.0 ENGINE WITH PULLSTART
Powering the RTR NITRO RS4 3 EVO+, the T3.0 is HPI's a fantastic engine for speed fanatics! With 3cc of displacement for an impressive 0.18 cubic inches, this is an easy upgrade for just about every on-road racer! Glow Plug: Cold R5 (HPI #1504) Displacement: 3.01cc Boar: 16.8mm Stroke: 13.6mm Power: 2.2hp @ 31,000 RPM Maximum RPM: 32,000 RPM Carburettor: F2-6.5 (Composite 6.5mm) Please note: The #15107 engine is NOT supplied with a Roto Start backplate as shown in the picture. This engine is supplied with a pullstarter. If you prefer to use a Roto Start with this engine, you will need #87132 Roto Start 2 Set and a standard 7.2 volt stick pack battery . A variety of race-tuned standard features will make the T3.0 your engine of choice. The finned crank case helps keep everything running at the right temperature, and the tall finned aluminium cooling head further reduces operating temp for optimum efficiency. With ABC construction (Aluminium piston, Brass cylinder liner sleeve, Chrome-plated liner) you get the benefit of decades of 2-stroke racing technology. The composite carb keeps needle tuning consistent as the engine heats up, and the wide 6.5mm opening ensures a good supply of fuel to the combustion chamber. All of this adds up to a fantastic engine that is solid, fast and easy to use! When you need to go all out to get maximum speed, you can depend on the HPI Nitro Star T3.0! £89.99 (RRP inc. VAT)
|
