#87130 - HPI ROTO START 2 SYSTEM (FOR NITRO STAR F SERIES ENGINE W/PULLSTART
£48.48 (*RRP inc. VAT)
# 87130 - HPI ROTO START 2 SYSTEM (FOR NITRO STAR F SERIES ENGINE W/PULLSTARTFOR HPI NITRO STAR F SERIES PULLSTART ENGINES/REQUIRES A 7.2V RECHARGEABLE STICK BATTERY PACK AND CHARGER
Start your vehicle quickly and easily with the updated Roto Start 2. The Roto Start 2 features a more durable case and to protect your engine it comes with a built in circuit breaker which cuts off in case of an overload (e.g. a flooded engine).
This HPI Nitro Roto Start 2 system is for the F & G series engines that use a 12mm One-Way Bearing.
The F3.5 V2, F4.6 V2, and G3.0 HO engines use a 14mm One-Way Bearing. For these engines use backplate #113736 or change the bearing to #1430.
Note: When using this system for the Trophy Truggy, whilst not essential, using starter shaft #87104 will give you some extra reach to the back of the engine.
The Roto Start 2 comes in three versions:
#87130 - HPI Roto Start 2 System for the Nitro Star F Series Engines
#87132 - HPI Roto Start 2 System for the Nitro Star 12/15/18 Engines.
#87148 - HPI Roto Start 2 System for the Nitro Star K Series Engines
7.2V stick battery packs are not included.
Roto-Start Back Plate (Bullet 3.0)
Optional Roto Start backplate for the stock Bullet G3.0 engine, for replacing the pull-start. Use with any Roto Start or Roto Start 2 system. Please note: To fit this roto-start onto a G3.0 HO engine (WR8), you must also change the one-way bearing to: #1430 - ONE WAY BEARING FOR PULLSTART
£17.99 (RRP inc. VAT)