GLOW STARTER (230V/UK 3 PIN)
Glow starters are used to heat up the glow plug in your engine when starting your nitro powered RC car. A hot glow plug will enable the fuel to ignite when the engine is starting. An engine will not start without a hot glow plug. Once the engine is running the glow starter can be removed from the engine. The solid metal HPI glow starter uses a 3 pincer claw which tightly grips the glow plug ensuring the best possible contact is achieved. Some cheaper starters will not ensure good contact is made with the glow plug. HPI glow starters give reliable contact between the glow starter and glow plug, helping you to start your engine quicker and prevent possible damage. This glow starter comes with a rechargeable battery built into the handle and a UK 3-pin charger.

Special Edition Savage X 4.6 RTR 2.4Ghz w/ Dodge Charger
Pre-Assembled 1/8th scale 4WD Nitro powered Monster Truck with radio system, 4.6 Nitro Engine and painted Dodge Charger body. RX Battery pack included. Charger required

RTR WR8 3.0 2011 Ford Abu Dhabi Castrol Fiesta WRC
Pre-assembled 1/8th scale 4WD nitro powered rally car with 3.0 HO engine, 2.4GHz radio system, SF-10W waterproof servos, painted & finished body.

D8S RTR
Pre-assembled 1/8th scale 4WD nitro powered buggy with F3.5 engine, 2.4GHz radio system, aluminum big bore shocks, aluminum shock towers, and painted body.

RTR NITRO RS4 EVO+ WITH RED PORSCHE 911 GT3 RS BODY
Pre-assembled 1/10th scale 4WD nitro powered car with T3.0 engine, radio set, two-speed transmission, ball bearings, painted finished body.

RTR NITRO RS4 3 DRIFT WITH Toyota SOARER BODY
Pre-assembled 1/10th scale 4WD nitro powered Drift car with G3.0 engine, pullstart, radio set, ball bearings, painted & finished body.

GLOW PLUG MEDIUM COLD R4 FOR 0.25 TO 0.28 ENGINES
GLOW PLUG MEDIUM COLD R4 FOR 0.25 TO 0.28 ENGINES

GLOW PLUG MEDIUM COLD R7 (For Turbo Head Engine)
GLOW PLUG MEDIUM COLD R7 (For Turbo Head Engine)

GLOW PLUG COLD R8 FOR TURBO HEAD ENGINES
The HPI 1508 turbo glow plug fits all nitro engines with a turbo head (i.e. team orion). The unique blend of platinum and iridium metals gives optimal performance, easy starting and a long lifetime.

4 WAY GLOW PLUG WRENCH (SMALL)
4 WAY GLOW PLUG WRENCH (SMALL)

ESCAPE 2 DC CHARGER 1-8 CELL FOR Tx,Rx,G.Start,7.2V, FLIGHT
Charge 1-8 NiMH or Ni-Cd batteries from your car's cigarette lighter while you drive to the track! Perfect for charging transmitter batteries, receiver packs, airplane packs, glow plug igniters and more! Use #HB31509 to charge receiver batteries, #HB31512 to charge HPI Micro battery packs, or #HB31516 to charge glow plug igniters. It doesn't get any easier.

Plastic glow starter D size
This massive glow starter uses a single 'D' size battery (not included) to give you plenty of charge throughout a long race weekend. No worries about losing power in your igniter! Features a spring-release glow plug clamp and long tube to reach through bodywork if necessary.

PLUG WRENCH 1/10 SIZE
This is the perfect wrench for 1/10th scale nitro racers. You get a long glow plug wrench for quick changes, a wheel nut wrench for emergency tyre changes, two more wrenches in convenient and commonly used sizes, plus storage for spare glow plugs right where you need them! Chrome-plated for durability and performance.

PLUG WRENCH 1/8 SIZE (#103-C)
This is the perfect wrench for 1/8th buggy racers. You get a long glow plug wrench for quick changes, a buggy wheel nut wrench for emergency tyre changes, two more wrenches in convenient and commonly used sizes, plus storage for spare glow plugs right where you need them! Chrome-plated for durability and performance.

RTR FIRESTORM 10T WITH 2.4GHz and DSX-1 TRUCK BODY
Pre-assembled 1/10th scale 2WD nitro powered truck with G3.0 engine, 2.4GHz radio system, SF-10W waterproof servos, and painted DSX-1 body.

RTR SAVAGE X 4.6 W/ 2.4GHz & NITRO GT-2 TRUCK BODY
Pre-Assembled 1/8th Scale 4WD Nitro Powered Truck with F4.6 Engine, Roto Start System, 2 Speed Transmission, and 2.4GHz radio system.

Trophy 4.6 RTR Truggy
Pre-assembled 1/8 Scale 4WD Truggy with Nitro Star F4.6 Engine and Painted Body

GLOW PLUG MEDIUM R3 FOR .12 TO.21 ENGINES
Power Plugs for Nitro car and truck engines! HPI Power Plugs use a unique blend of platinum and iridium metals to produce a range of quality glow plugs that is suitable for hobbyists and racers. Recommended Power Plugs for HPI engines #1502 Medium R3 - 12R XS #1503 Medium Cold R4 - 21BB/S-25 #1504 Cold R5 - All HPI .15 engines (T-15, 15FE, etc.)

NITRO STAR K4.6 ENGINE WITH PULLSTART
4.6CC/ABC/6 PORT + 2 BYPASS PORT/8.5MM COMPOSITE SLIDE CARB/ALUMINIUM HEAT SINK HEAD(PURPLE)/REAR EXHAUST/R5 GLOW PLUG

RTR NITRO 3 2.4 WITH PORSCHE GT-3 BODY
Pre-assembled 1/10th scale 4WD nitro powered car with T3.0 engine, 2.4GHz radio system, 2 speed transmission, SF-10W waterproof servos, painted & finished body.

RTR NITRO 3 2.4GHz WITH BMW M3 BODY
Pre-assembled 1/10th scale 4WD nitro powered car with T3.0 engine, Roto Start, 2.4GHz radio system, 2 speed transmission, SF-10W waterproof servos, painted & finished body.

Bullet ST 3.0 RTR 2.4 GHz
Pre-assembled 1/10 Scale 4WD Stadium Truck with 2.4 GHz radio, Nitro Star G3.0 Engine and Painted Body

Bullet MT 3.0 RTR 2.4 GHz
Pre-assembled 1/10 Scale 4WD Monster Truck with 2.4 GHz radio, Nitro Star G3.0 Engine and Painted Body

Trophy 3.5 Buggy RTR 2.4GHz
Pre-assembled 1/8 Scale 4WD Buggy with Nitro Star F3.5 Engine and Painted Body