HPI Plazma 11.1V 3800mAh 30C Lipo Rectangular Case Stick Pack Re-Chargeable Battery, Deans Plug & JST-XH Balance Lead
HPI Plazma 11.1V 3800mAh 30C Lipo Rectangular Case Stick Pack Re-Chargeable Batter, Deans Plug & JST-XH Balance Lead

NITRO STAR T3.0 ENGINE WITH PULLSTART
Powering the RTR NITRO RS4 3 EVO+, the T3.0 is HPI's a fantastic engine for speed fanatics! With 3cc of displacement for an impressive 0.18 cubic inches, this is an easy upgrade for just about every on-road racer! Glow Plug: Cold R5 (HPI #1504) Displacement: 3.01cc Boar: 16.8mm Stroke: 13.6mm Power: 2.2hp @ 31,000 RPM Maximum RPM: 32,000 RPM Carburettor: F2-6.5 (Composite 6.5mm) Please note: The #15107 engine is NOT supplied with a Roto Start backplate as shown in the picture. This engine is supplied with a pullstarter. If you prefer to use a Roto Start with this engine, you will need #87132 Roto Start 2 Set and a standard 7.2 volt stick pack battery . A variety of race-tuned standard features will make the T3.0 your engine of choice. The finned crank case helps keep everything running at the right temperature, and the tall finned aluminium cooling head further reduces operating temp for optimum efficiency. With ABC construction (Aluminium piston, Brass cylinder liner sleeve, Chrome-plated liner) you get the benefit of decades of 2-stroke racing technology. The composite carb keeps needle tuning consistent as the engine heats up, and the wide 6.5mm opening ensures a good supply of fuel to the combustion chamber. All of this adds up to a fantastic engine that is solid, fast and easy to use! When you need to go all out to get maximum speed, you can depend on the HPI Nitro Star T3.0!

CASE FOR ROTO START BACK PLATE UNIT (K SERIES ENGINE)
SPARE PARTS FOR 87126 ROTO START SYSTEM OR 87127 BACK PLATE UNIT

HPI Nitro Starter Pack (UK 3-Pin)
For all HPI Nitro Cars

HPI Pulse 4.6 Buggy RTR
1/8th Scale 4wd Nitro Rallycross Buggy RTR.

HPI ROTO START 2 SYSTEM (K SERIES W/ LONG SHAFT)
Back plate for use on K series engines. Long shaft for use with extended Savage chassis. Requires a 7.2V rechargeable \"stick\" battery pack & charger.

GT 7.2V 3300mAh Ni-MH BATTERY
Use Ni-MH compatible charger

NITRO STAR K4.6 ENGINE WITH PULLSTART
4.6CC/ABC/6 PORT + 2 BYPASS PORT/8.5MM COMPOSITE SLIDE CARB/ALUMINIUM HEAT SINK HEAD(PURPLE)/REAR EXHAUST/R5 GLOW PLUG

CASE FOR MOTOR UNIT (ROTO START)
SPARE PARTS FOR 87110 HPI ROTO START

BATTERY LID FOR MOTOR UNIT (ROTO START)
SPARE PARTS FOR 87110 HPI ROTO START

GEAR SET FOR MOTOR UNIT (ROTO START)
SPARE PARTS FOR 87110 HPI ROTO START

STARTER SHAFT WITH O RING (ROTO START)
SPARE PARTS FOR 87110 HPI ROTO START

BACK PLATE UNIT FOR NITRO STAR BB SERIES AND FORCE 21/25 (ROTO START)
SPARE PARTS FOR 87110 HPI ROTO START/NITRO BB SERIES/FORCE 21/25

GEAR SET FOR BACK PLATE UNIT (ROTO START)
SPARE PARTS FOR 87110 HPI ROTO START

CASE FOR BACK PLATE UNIT (ROTO START)
SPARE PARTS FOR 87110 HPI ROTO START

GEAR SET FOR ROTO START BACK PLATE UNIT (K SERIES)
SPARE PARTS FOR 87126 ROTO START SYSTEM OR 87127 BACK PLATE UNIT

Trophy 3.5 RTR Buggy
Pre-assembled 1/8 Scale 4WD Buggy with Nitro Star F3.5 Engine and Painted Body

NITRO STAR F4.1 ENGINE WITH PULLSTART
4.1CC/COMPOSITE SLIDE CARB/NEW PORT TIMING/REAR EXHAUST/PULLSTART/INCLUDES AIR CLEANER AND GLOW PLUG (R5)

Nitro Star F3.5 Engine with Pullstart (Gunmetal/Black)
Composite Slide Carb./New Port Timing/Rear Exhaust/Pullstart/Includes Air Cleaner and Glow Plug (R5)

Trophy 3.5 Buggy RTR 2.4GHz
Pre-assembled 1/8 Scale 4WD Buggy with Nitro Star F3.5 Engine and Painted Body

Trophy 4.6 Truggy RTR 2.4GHz
Pre-assembled 1/8 Scale 4WD Truggy with Nitro Star F4.6 Engine and Painted Body

Pulse 4.6 Buggy RTR 2.4GHz
1/8th Scale 4wd Nitro Rallycross Buggy with Nitro Star K4.6 HO Engine and Painted Body

Plazma Pouch Lipo safe bag (18x22cm)
Charge your LiPo batteries with complete confidence using the HPI Plazma Pouch LiPo Safe Bag! The HPI Plazma Pouch is the ultimate protection for LiPo batteries while storing, charging or cycling your Plazma LiPo batteries or any other brand of LiPo batteries. The Plazma Pouch is flameproof and provides protection from overcharged or damaged batteries while they are being charged or stored in the Plazma Pouch. Check out the full range of HPI Plazma LiPo batteries! #101940 HPI Plazma 7.4V 3000mAh 20C Lipo Round Case Stick Pack Re-Chargeable Battery #101941 HPI Plazma 7.4V 4000mAh 20C Lipo Round Case Stick Pack Re-Chargeable Battery #101942 HPI Plazma 7.4V 5300mAh 30C Lipo Rectangular Case Stick Pack Re-Chargeable Battery #101943 HPI Plazma 11.1V 3800mAh 30C Lipo Rectangular Case Stick Pack Re-Chargeable Battery Use the rounded stick pack style for universal fit in most electric-powered kits and battery-powered accessories like the HPI Roto Start. The square-cornered style is great for racing kits like the Cyclone and the Vorza, which fits battery packs side-by-side.

HPI Plazma 7.2V 2400mAh Nimh Stick Pack Re-Chargeable battery
HPI Plazma 7.2V 2400mAh Nimh Stick Pack Re-Chargeable battery